Explicitly set the dr_mode for the dwc3 controller on the Snow board to host mode. This is required to ensure the controller is initialized in the right mode if the kernel is build with USB gadget support.
Signed-off-by: Sjoerd Simons <[email protected]> --- arch/arm/boot/dts/exynos5250-snow.dts | 4 ++++ arch/arm/boot/dts/exynos5250.dtsi | 2 +- 2 files changed, 5 insertions(+), 1 deletion(-) diff --git a/arch/arm/boot/dts/exynos5250-snow.dts b/arch/arm/boot/dts/exynos5250-snow.dts index e51fcef..60429ad 100644 --- a/arch/arm/boot/dts/exynos5250-snow.dts +++ b/arch/arm/boot/dts/exynos5250-snow.dts @@ -624,4 +624,8 @@ num-cs = <1>; }; +&usbdrd_dwc3 { + dr_mode = "host"; +}; + #include "cros-ec-keyboard.dtsi" diff --git a/arch/arm/boot/dts/exynos5250.dtsi b/arch/arm/boot/dts/exynos5250.dtsi index f21b9aa..d55c1a2 100644 --- a/arch/arm/boot/dts/exynos5250.dtsi +++ b/arch/arm/boot/dts/exynos5250.dtsi @@ -555,7 +555,7 @@ #size-cells = <1>; ranges; - dwc3 { + usbdrd_dwc3: dwc3 { compatible = "synopsys,dwc3"; reg = <0x12000000 0x10000>; interrupts = <0 72 0>; -- 2.1.3 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html
