As pointed by Mark, it is generally useful to log the error code when
reporting a failure. This patch improves existing calls to dev_err()
in ISL12057 driver to also report error code.

Suggested-by: Mark Brown <[email protected]>
Signed-off-by: Arnaud Ebalard <[email protected]>
---
 drivers/rtc/rtc-isl12057.c | 22 ++++++++++++++--------
 1 file changed, 14 insertions(+), 8 deletions(-)

diff --git a/drivers/rtc/rtc-isl12057.c b/drivers/rtc/rtc-isl12057.c
index 31eaa6a9c2b2..a783e16cfd2f 100644
--- a/drivers/rtc/rtc-isl12057.c
+++ b/drivers/rtc/rtc-isl12057.c
@@ -170,8 +170,8 @@ static int isl12057_rtc_read_time(struct device *dev, 
struct rtc_time *tm)
        mutex_lock(&data->lock);
        ret = regmap_read(data->regmap, ISL12057_REG_SR, &sr);
        if (ret) {
-               dev_err(dev, "%s: unable to read oscillator status flag\n",
-                       __func__);
+               dev_err(dev, "%s: unable to read oscillator status flag (%d)\n",
+                       __func__, ret);
                goto out;
        } else {
                if (sr & ISL12057_REG_SR_OSF) {
@@ -183,7 +183,8 @@ static int isl12057_rtc_read_time(struct device *dev, 
struct rtc_time *tm)
        ret = regmap_bulk_read(data->regmap, ISL12057_REG_RTC_SC, regs,
                               ISL12057_RTC_SEC_LEN);
        if (ret)
-               dev_err(dev, "%s: unable to read RTC time\n", __func__);
+               dev_err(dev, "%s: unable to read RTC time section (%d)\n",
+                       __func__, ret);
 
 out:
        mutex_unlock(&data->lock);
@@ -210,7 +211,8 @@ static int isl12057_rtc_set_time(struct device *dev, struct 
rtc_time *tm)
        ret = regmap_bulk_write(data->regmap, ISL12057_REG_RTC_SC, regs,
                                ISL12057_RTC_SEC_LEN);
        if (ret) {
-               dev_err(dev, "%s: writing RTC time failed\n", __func__);
+               dev_err(dev, "%s: unable to write RTC time section (%d)\n",
+                       __func__, ret);
                goto out;
        }
 
@@ -221,7 +223,8 @@ static int isl12057_rtc_set_time(struct device *dev, struct 
rtc_time *tm)
        ret = regmap_update_bits(data->regmap, ISL12057_REG_SR,
                                 ISL12057_REG_SR_OSF, 0);
        if (ret < 0)
-               dev_err(dev, "Unable to clear oscillator failure bit\n");
+               dev_err(dev, "%s: unable to clear osc. failure bit (%d)\n",
+                       __func__, ret);
 
 out:
        mutex_unlock(&data->lock);
@@ -242,7 +245,8 @@ static int isl12057_check_rtc_status(struct device *dev, 
struct regmap *regmap)
        ret = regmap_update_bits(regmap, ISL12057_REG_INT,
                                 ISL12057_REG_INT_EOSC, 0);
        if (ret < 0) {
-               dev_err(dev, "Unable to enable oscillator\n");
+               dev_err(dev, "%s: unable to enable oscillator (%d)\n",
+                       __func__, ret);
                return ret;
        }
 
@@ -250,7 +254,8 @@ static int isl12057_check_rtc_status(struct device *dev, 
struct regmap *regmap)
        ret = regmap_update_bits(regmap, ISL12057_REG_SR,
                                 ISL12057_REG_SR_A1F, 0);
        if (ret < 0) {
-               dev_err(dev, "Unable to clear alarm bit\n");
+               dev_err(dev, "%s: unable to clear alarm bit (%d)\n",
+                       __func__, ret);
                return ret;
        }
 
@@ -284,7 +289,8 @@ static int isl12057_probe(struct i2c_client *client,
        regmap = devm_regmap_init_i2c(client, &isl12057_rtc_regmap_config);
        if (IS_ERR(regmap)) {
                ret = PTR_ERR(regmap);
-               dev_err(dev, "regmap allocation failed: %d\n", ret);
+               dev_err(dev, "%s: regmap allocation failed (%d)\n",
+                       __func__, ret);
                return ret;
        }
 
-- 
2.1.1


--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to [email protected]
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Reply via email to