This patch defines common Armada 370 pinctrl settings for uart0 and uart1 interfaces:
uart0: MPP0-1 as default uart1: MPP41-42 as default Note: this patch has the potential to break out-of-tree users w/o specific pinctrl settings for their uart interfaces if the default above does not match their config. Suggested-by: Andrew Lunn <[email protected]> Signed-off-by: Arnaud Ebalard <[email protected]> --- arch/arm/boot/dts/armada-370.dtsi | 25 +++++++++++++++++++++++++ 1 file changed, 25 insertions(+) diff --git a/arch/arm/boot/dts/armada-370.dtsi b/arch/arm/boot/dts/armada-370.dtsi index f1284ae0cddd..b8de32b2a265 100644 --- a/arch/arm/boot/dts/armada-370.dtsi +++ b/arch/arm/boot/dts/armada-370.dtsi @@ -211,6 +211,21 @@ pinctrl-names = "default"; }; + /* + * Default UART pinctrl setting without RTS/CTS, can + * be overwritten on board level if a different + * configuration is used. + */ + uart0: serial@12000 { + pinctrl-0 = <&uart0_pins>; + pinctrl-names = "default"; + }; + + uart1: serial@12100 { + pinctrl-0 = <&uart1_pins>; + pinctrl-names = "default"; + }; + usb@50000 { clocks = <&coreclk 0>; }; @@ -281,6 +296,16 @@ marvell,function = "spi1"; }; + uart0_pins: uart0-pins { + marvell,pins = "mpp0", "mpp1"; + marvell,function = "uart0"; + }; + + uart1_pins: uart1-pins { + marvell,pins = "mpp41", "mpp42"; + marvell,function = "uart1"; + }; + sdio_pins1: sdio-pins1 { marvell,pins = "mpp9", "mpp11", "mpp12", "mpp13", "mpp14", "mpp15"; -- 2.1.1 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html
