On Fri, Nov 21, 2014 at 07:17:18PM +0100, Johannes Pointner wrote:
> Before the patches were also jumps but I thought it is something
> Vignesh should know. Maybe there is some fix for that too?
> As Richard also noted, it would be nice if ti could let us know how to
> get the delay values right. By trial and error is IMHO not the best
> way.
That is not only an opinion, it is a matter of fact. TI really dropped
the ball on this one. I thought the patch series was a sign they
finally were going to properly address this issue. Wrong again.
The data sheet for the TI part used to have a reference to an app-note
for the touch controller.
spruh73f page 1154
The Pen IRQ can only occur if the correct Pen Ctrl bits are high
(AFE Pen Ctrl bits 6:5 in the TSC_ADC control register) and if
the correct ground transistor biasing is set in the StepConfig
[N] Register. Refer to the application notes for the correct
settings.
I searched high and low for this application note. Then, the data
sheet got revised.
Thanks,
Richard
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
