On Saturday 22 November 2014 02:53:29 Ganapatrao Kulkarni wrote:
> +/ {
> + model = "Cavium ThunderX CN88XX board";
> + compatible = "cavium,thunder-88xx";
No wildcards in compatible strings or model names please. List the
exact chip that you are using.
> + aliases {
> + serial0 = &uaa0;
> + serial1 = &uaa1;
> + };
> +
> + memory@00c00000 {
> + device_type = "memory";
> + reg = <0x0 0x00000000 0x0 0x80000000>;
> + };
> +
> + memory@10000000000 {
> + device_type = "memory";
> + reg = <0x100 0x00000000 0x0 0x80000000>;
> + };
> +
> + numa-map {
> + #address-cells = <2>;
> + #size-cells = <1>;
> + #node-count = <2>;
> + mem-map = <0x0 0x00000000 0>,
> + <0x100 0x00000000 1>;
> +
> + cpu-map = <0 47 0>,
> + <48 95 1>;
> +
> + node-matrix= <0 0 10>,
> + <0 1 20>,
> + <1 0 20>,
> + <1 1 10>;
I don't know how much history is behind this binding. Have you looked
at the sPAPR way of doing this? I don't remember exactly how that is
done, but we'd need a good reason to discard that and implement
something else for arm64.
If we create a new binding, I don't think the 'numa-map' node you
have here is the best solution. We already have device nodes for each
memory segment and each CPU in the system. Why not work with those
nodes directly?
> +
> + timer {
> + compatible = "arm,armv8-timer";
> + interrupts = <1 13 0xff01>,
> + <1 14 0xff01>,
> + <1 11 0xff01>,
> + <1 10 0xff01>;
> + };
> +
> + soc {
> + compatible = "simple-bus";
> + #address-cells = <2>;
> + #size-cells = <2>;
> + ranges;
> +
> + refclk50mhz: refclk50mhz {
> + compatible = "fixed-clock";
> + #clock-cells = <0>;
> + clock-frequency = <50000000>;
> + clock-output-names = "refclk50mhz";
> + };
Why is the timer outside of the soc and the refclk is inside?
I would have expected the opposite.
Arnd
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
