Hi Sören,

Am 01.12.2014 um 19:42 schrieb Soren Brinkmann:
> Add USB nodes to zc702, zc706 and zed device trees.
> 
> Signed-off-by: Soren Brinkmann <[email protected]>
> ---
>  arch/arm/boot/dts/zynq-7000.dtsi | 22 +++++++++++++++++++++-
>  arch/arm/boot/dts/zynq-zc702.dts | 11 +++++++++++
>  arch/arm/boot/dts/zynq-zc706.dts | 10 ++++++++++
>  arch/arm/boot/dts/zynq-zed.dts   | 10 ++++++++++
>  4 files changed, 52 insertions(+), 1 deletion(-)
> 
> diff --git a/arch/arm/boot/dts/zynq-7000.dtsi 
> b/arch/arm/boot/dts/zynq-7000.dtsi
> index ce2ef5bec4f2..9ed60938f301 100644
> --- a/arch/arm/boot/dts/zynq-7000.dtsi
> +++ b/arch/arm/boot/dts/zynq-7000.dtsi
> @@ -315,6 +315,26 @@
>                       clocks = <&clkc 4>;
>               };
>  
> +             usb0: usb@e0002000 {
> +                     compatible = "xlnx,zynq-usb-2.20a", "chipidea,usb2";
> +                     status = "disabled";
> +                     clocks = <&clkc 28>;
> +                     interrupt-parent = <&intc>;
> +                     interrupts = <0 21 4>;
> +                     reg = <0xe0002000 0x1000>;
> +                     phy_type = "ulpi";
> +             };
> +
> +             usb1: usb@e0003000 {
> +                     compatible = "xlnx,zynq-usb-2.20a", "chipidea,usb2";
> +                     status = "disabled";
> +                     clocks = <&clkc 29>;
> +                     interrupt-parent = <&intc>;
> +                     interrupts = <0 44 4>;
> +                     reg = <0xe0003000 0x1000>;
> +                     phy_type = "ulpi";
> +             };
> +
>               watchdog0: watchdog@f8005000 {
>                       clocks = <&clkc 45>;
>                       compatible = "xlnx,zynq-wdt-r1p2";

This part looks good.

> @@ -324,6 +344,6 @@
>                       reg = <0xf8005000 0x1000>;
>                       reset = <0>;
>                       timeout-sec = <10>;
> -             };
> +             } ;
>       };
>  };

Unrelated accidental change here though. :)

Did I miss a matching series actually implementing the driver? I'd need
to test the latest version to determine how to update the Parallella
device tree - I assume that USB0 is in dr_mode="host", but with the
previous patchsets I was unable to verify. CC'ing Ola.

Regards,
Andreas

-- 
SUSE LINUX GmbH, Maxfeldstr. 5, 90409 Nürnberg, Germany
GF: Jeff Hawn, Jennifer Guild, Felix Imendörffer; HRB 21284 AG Nürnberg
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to [email protected]
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Reply via email to