Hi Samuel,
I think it is time to drop the ongoing work for Secure Element support for
a first review.
I guess patches #1, #2, #3, #4, #13, #14, #16, #17, #18 and #34 are sanity
patches.
May be they could target a second pull request for 3.19 (?)
Most likely:
- #1 and #2 are a resend from the previous patchset trying to not break an
ABI. If you believe they are not necessary, i will understand.
- #3 and #4 are taking into account feedbacks from Dan Carpenter & Julia Lawall.
- #13, #14, #16 and #18 are just sanity patches
- #17 and #34 remove a memory leaks
Secure Element support for HCI based NFC controller:
--------------------------------------------
I am changing a little bit the way pipes and gates are referenced because 1 gate
on the Terminal Host may connect severals differents Host (e.g: UICC, eSE...).
I chose to reference a pipe with a tuple {gate, host}.
I chose also to keep the gate --> pipe reference with a little drawback:
- se_io will only be able to send data to an eSE (over SWP)... To my knowledge
the aren't any UICC with APDU Reader gate available in the field.
Overall patches:
- #5 to #12 are introducing this pipe referencing changes.
- #15 and #19 are introducing Secure Element complete support for ST21NFCA.
Secure Element support for NCI based NFC controller:
----------------------------------------------------
I have to introduce dynnamic conn_id management has described in the NCI
specification. Only RF static conn_id was supported so far. I have tried to
do a minimun changeset in order to bring all the necessary NCI functions in
order to operate with a secure element with ST21NFCB NFC controller. Besides the
standard NCI commands, the HCI commands are sent following a proprietary
implementation.
Overall patches:
- #20 to #26 are introducing NCI core changes in order to be able to support
secure element communication.
- #27 is bringing support for HCI protocol allowing to send HCI data over NCI.
- #28 is introducing Secure Element support for ST21NFCB.
Miscellaneous
-------------
I am also routing the HCI event TRANSACTION up to user space. It may help to
understand
the necessity to reference every pipe with a tuple {gate, host}. This for
example allows
to keep the host information generating this particular event.
Open Questions:
---------------
Both integration may have little gap in their card emulation behavior.
For example:
- ST21NFCA will have card emulation active as soon as we activate a secure
element.
- ST21NFCB will have card emulation active according to the selected polling
mode.
When do you expect to have card emulation to be active ?
When an application is running, it might be necessary to signals to the under
layers
that it has finished to operate with a particular secure element. The goal here
is to release
a secure element without deactivating it. For example to allow automatic sleep
mode.
With my current implementation,
- With ST21NFCB, enable_se/disable_se may fit this request as both secure
element are kept activated.
- With ST21NFCA, enable_se/disable_se does not fit this requirement as i am
completely deactivating
the secure element.
I am not sure if the SE activation should not be done in the discovery_se
without any deactivation
until the device remove function(?).
Any feedback are welcome.
Best Regards
Christophe
Christophe Ricard (34):
NFC: dts: st21nfca: Fix compatible string spelling to follow other
drivers
NFC: dts: st21nfcb: Fix compatible string spelling to follow other
drivers
NFC: st21nfcb: Fix "WARNING: invalid free of devm_ allocated data"
NFC: st21nfca: Remove unreachable code
NFC: hci: Change event_received handler gate parameter to pipe
NFC: hci: Add pipes table to reference them with a tuple {gate, host}
NFC: hci: Change nfc_hci_send_response gate parameter to pipe
NFC: hci: Reference every pipe information according to notification
NFC: hci: Add cmd_received handler
NFC: pn544: Change event_received gate parameter to pipe
NFC: microread: Change event_received gate parameter to pipe
NFC: hci: Remove nfc_hci_pipe2gate function
NFC: nfc_enable_se Remove useless blank line at beginning of function
NFC: nfc_disable_se Remove useless blank line at beginning of function
NFC: st21nfca: Adding support for secure element
NFC: st21nfca: Remove useless ST21NFCA_SE_HOST_EVT_HOT_PLUG macro
NFC: st21nfca: Remove skb_pipe_list and skb_pipe_info useless
allocation
NFC: st21nfca: Remove checkpatch.pl warning Possible unnecessary 'out
of memory' message
NFC: dts: st21nfca: Document ese-present & uicc-present DTS property
NFC: nci: Add dynamic conn_id NCI concept.
NFC: nci: Make nci_request available for nfc driver
NFC: nci: Add NCI NFCEE constant
NFC: nci: Add nci_nfcee_discover handler command/response/notification
NFC: nci: Add nci_nfcee_mode_set handler command/response
NFC: nci: Add nci_core_conn_create handler command/response
NFC: nci: Add nci_core_conn_close handler command/response
NFC: st21nfcb: Add HCI protocol over NCI protocol support
NFC: st21nfcb: Adding support for secure element
NFC: Forward NFC_EVT_TRANSACTION up to user space
NFC: nci: Add support RF_NFCEE_ACTION_NTF
NFC: nci: Change NCI state machine to LISTEN_ACTIVE and ignore
parameters in rf_intf_activated_ntf
NFC: st21nfcb: Add support for HCI event transaction
NFC: st21nfca: Add support for HCI event transaction
NFC: st21nfca: Fix some skb memory leaks
.../devicetree/bindings/net/nfc/st21nfca.txt | 11 +-
.../devicetree/bindings/net/nfc/st21nfcb.txt | 4 +-
drivers/nfc/microread/microread.c | 3 +-
drivers/nfc/pn544/pn544.c | 3 +-
drivers/nfc/st21nfca/Makefile | 2 +-
drivers/nfc/st21nfca/i2c.c | 23 +-
drivers/nfc/st21nfca/st21nfca.c | 186 +++--
drivers/nfc/st21nfca/st21nfca.h | 21 +-
drivers/nfc/st21nfca/st21nfca_se.c | 411 +++++++++++
drivers/nfc/st21nfca/st21nfca_se.h | 63 ++
drivers/nfc/st21nfcb/Makefile | 2 +-
drivers/nfc/st21nfcb/i2c.c | 1 +
drivers/nfc/st21nfcb/ndlc.c | 1 -
drivers/nfc/st21nfcb/st21nfcb.c | 8 +-
drivers/nfc/st21nfcb/st21nfcb.h | 2 +
drivers/nfc/st21nfcb/st21nfcb_hci_core.c | 783 +++++++++++++++++++++
drivers/nfc/st21nfcb/st21nfcb_hci_core.h | 134 ++++
drivers/nfc/st21nfcb/st21nfcb_se.c | 631 +++++++++++++++++
drivers/nfc/st21nfcb/st21nfcb_se.h | 59 ++
include/linux/platform_data/st21nfca.h | 2 +
include/net/nfc/hci.h | 27 +-
include/net/nfc/nci.h | 95 +++
include/net/nfc/nci_core.h | 40 +-
include/net/nfc/nfc.h | 27 +
include/uapi/linux/nfc.h | 1 +
net/nfc/core.c | 23 +-
net/nfc/hci/command.c | 13 +-
net/nfc/hci/core.c | 96 ++-
net/nfc/hci/hci.h | 10 +-
net/nfc/hci/hcp.c | 11 -
net/nfc/nci/core.c | 112 ++-
net/nfc/nci/data.c | 57 +-
net/nfc/nci/ntf.c | 82 ++-
net/nfc/nci/rsp.c | 94 ++-
net/nfc/netlink.c | 47 ++
net/nfc/nfc.h | 2 +
36 files changed, 2926 insertions(+), 161 deletions(-)
create mode 100644 drivers/nfc/st21nfca/st21nfca_se.c
create mode 100644 drivers/nfc/st21nfca/st21nfca_se.h
create mode 100644 drivers/nfc/st21nfcb/st21nfcb_hci_core.c
create mode 100644 drivers/nfc/st21nfcb/st21nfcb_hci_core.h
create mode 100644 drivers/nfc/st21nfcb/st21nfcb_se.c
create mode 100644 drivers/nfc/st21nfcb/st21nfcb_se.h
--
2.1.0
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
