For sama5d3xmb board, the pins: pinctrl_isi_{power,reset} is used to
power-down or reset camera sensor.
So we should let camera sensor instead of ISI to configure the pins.
This patch will change pinctrl name from pinctrl_isi_{power,reset} to
pinctrl_sensor_{power,reset}. And remove these two pinctrl from ISI's
DT node. We will add these two pinctrl to sensor's DT node.
Signed-off-by: Josh Wu <[email protected]>
---
v1 -> v2:
1. only do things that mentioned in commit message.
arch/arm/boot/dts/sama5d3xmb.dtsi | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/arch/arm/boot/dts/sama5d3xmb.dtsi
b/arch/arm/boot/dts/sama5d3xmb.dtsi
index 6af1cba..db47f8b 100644
--- a/arch/arm/boot/dts/sama5d3xmb.dtsi
+++ b/arch/arm/boot/dts/sama5d3xmb.dtsi
@@ -61,7 +61,7 @@
isi: isi@f0034000 {
pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_isi_data_0_7
&pinctrl_isi_pck_as_mck &pinctrl_isi_power &pinctrl_isi_reset>;
+ pinctrl-0 = <&pinctrl_isi_data_0_7
&pinctrl_isi_pck_as_mck>;
};
mmc1: mmc@f8000000 {
@@ -122,12 +122,12 @@
<AT91_PIOD 31
AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PD31 periph B ISI_MCK */
};
- pinctrl_isi_reset: isi_reset-0 {
+ pinctrl_sensor_reset: sensor_reset-0 {
atmel,pins =
<AT91_PIOE 24
AT91_PERIPH_GPIO AT91_PINCTRL_NONE>; /* PE24 gpio */
};
- pinctrl_isi_power: isi_power-0 {
+ pinctrl_sensor_power: sensor_power-0 {
atmel,pins =
<AT91_PIOE 29
AT91_PERIPH_GPIO AT91_PINCTRL_NONE>; /* PE29 gpio */
};
--
1.9.1
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
