Hello.

On 1/5/2015 1:21 PM, Suman Tripathi wrote:

   Your patch summary seems too long.

This patch implements the function xgene_ahci_poll_reg_val to poll
PxCI for multiple IDENTIFY DEVICE commands to finish before
restarting the DMA engine in case of Port Multiplier.

Signed-off-by: Suman Tripathi <[email protected]>
---
  drivers/ata/ahci_xgene.c | 56 ++++++++++++++++++++++++++++++++++++++++++++++--
  1 file changed, 54 insertions(+), 2 deletions(-)

diff --git a/drivers/ata/ahci_xgene.c b/drivers/ata/ahci_xgene.c
index 0f8538f..2180223 100644
--- a/drivers/ata/ahci_xgene.c
+++ b/drivers/ata/ahci_xgene.c
@@ -105,17 +105,69 @@ static int xgene_ahci_init_memram(struct 
xgene_ahci_context *ctx)
  }

  /**
+ * xgene_ahci_poll_reg_val- Poll a register on a specific value.
+ * @ap : ATA port of interest.
+ * @reg : Register of interest.
+ * @val : Value to be attained.
+ * @interval : waiting interval for polling.
+ * @timeout : timeout for achieving the value.
+ */
+static int xgene_ahci_poll_reg_val(struct ata_port *ap,
+                                  void __iomem *reg, unsigned
+                                  int val, unsigned long interval,
+                                  unsigned long timeout)
+{
+       unsigned long deadline;
+       unsigned int tmp;
+
+       tmp = ioread32(reg);
+       deadline = ata_deadline(jiffies, timeout);
+
+       while ((tmp != val) && (time_before(jiffies, deadline))) {

Parens around the operands of && are not needed, especially around the right one.

+               ata_msleep(ap, interval);
+               tmp = ioread32(reg);
+       }
+
+       return tmp;
+}
+
+/**
   * xgene_ahci_restart_engine - Restart the dma engine.
   * @ap : ATA port of interest
   *
- * Restarts the dma engine inside the controller.
+ * Waits for completion of multiple commands and restarts
+ * the DMA engine inside the controller.
   */
  static int xgene_ahci_restart_engine(struct ata_port *ap)
  {
        struct ahci_host_priv *hpriv = ap->host->private_data;
+       struct ahci_port_priv *pp = ap->private_data;
+       void __iomem *port_mmio = ahci_port_base(ap);
+       u32 fbs;
+
+       /*
+        * In case of PMP multiple IDENTIFY DEVICE commands can be
+        * issued inside PxCI. So need to poll PxCI for the
+        * completion of outstanding IDENTIFY DEVICE commands before
+        * we restart the DMA engine.
+        */
+       if (xgene_ahci_poll_reg_val(ap, port_mmio +
+                                   PORT_CMD_ISSUE, 0x0, 1, 100))
+                 return -EBUSY;

        ahci_stop_engine(ap);
        ahci_start_fis_rx(ap);
+
+       /*
+        * Enable the PxFBS.FBS_EN bit as it
+        * gets cleared due to stop engine.

   s/stop/stopping the/.

[...]

MBR, Sergei

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to [email protected]
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Reply via email to