Hi,
On 08/01/2015 at 20:12:04 +0100, Alexander Stein wrote : > Now that the implementation has been applied to sound/for-next > (https://git.kernel.org/cgit/linux/kernel/git/tiwai/sound.git/log/?h=for-next > ), who is going to pick the related patches (this one and the other two > adding documentation and default config)? > Nicolas will do it but he has not yet started to create a branch for 3.20. > Best regards, > Alexander > > On Monday 29 December 2014, 13:08:41 wrote Alexander Stein: > > This adds the device node for the ac97 controller. > > > > Signed-off-by: Alexander Stein <[email protected]> > > Acked-By Alexandre Belloni <[email protected]> > > --- > > Changes in v3: > > * Renamed the compatible string to atmel,at91sam9263-ac97c > > * Added 'Acked-By Alexandre Belloni <[email protected]>' > > > > arch/arm/boot/dts/at91sam9263.dtsi | 21 +++++++++++++++++++++ > > 1 file changed, 21 insertions(+) > > > > diff --git a/arch/arm/boot/dts/at91sam9263.dtsi > > b/arch/arm/boot/dts/at91sam9263.dtsi > > index 6283785..2e67e38 100644 > > --- a/arch/arm/boot/dts/at91sam9263.dtsi > > +++ b/arch/arm/boot/dts/at91sam9263.dtsi > > @@ -700,6 +700,16 @@ > > }; > > }; > > > > + ac97 { > > + pinctrl_ac97: ac97-0 { > > + atmel,pins = > > + <AT91_PIOB 0 > > AT91_PERIPH_A AT91_PINCTRL_NONE /* PB12 periph A AC97FS pin */ > > + AT91_PIOB 1 > > AT91_PERIPH_A AT91_PINCTRL_NONE /* PB13 periph A AC97CK pin */ > > + AT91_PIOB 2 > > AT91_PERIPH_A AT91_PINCTRL_NONE /* PB14 periph A AC97TX pin */ > > + AT91_PIOB 3 > > AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PB14 periph A AC97RX pin */ > > + }; > > + }; > > + > > pioA: gpio@fffff200 { > > compatible = "atmel,at91rm9200-gpio"; > > reg = <0xfffff200 0x200>; > > @@ -828,6 +838,17 @@ > > status = "disabled"; > > }; > > > > + ac97: sound@fffa0000 { > > + compatible = "atmel,at91sam9263-ac97c"; > > + reg = <0xfffa0000 0x4000>; > > + interrupts = <18 IRQ_TYPE_LEVEL_HIGH 5>; > > + pinctrl-names = "default"; > > + pinctrl-0 = <&pinctrl_ac97>; > > + clocks = <&ac97_clk>; > > + clock-names = "ac97_clk"; > > + status = "disabled"; > > + }; > > + > > macb0: ethernet@fffbc000 { > > compatible = "cdns,at32ap7000-macb", > > "cdns,macb"; > > reg = <0xfffbc000 0x100>; > > > -- Alexandre Belloni, Free Electrons Embedded Linux, Kernel and Android engineering http://free-electrons.com -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html
