Hi Linus,
I rebased my branch onto your current pinctrl/devel. Other than that
this should be exactly what has been sent out as v3. This time I'll use
the gmail SMTP again, which hopefully resolves the encoding issue.
Thanks,
Sören
Soren Brinkmann (7):
pinctrl: pinconf-generic: Infer map type from DT property
pinctrl: pinconf-generic: Allow driver to specify DT params
pinctrl: zynq: Document DT binding
pinctrl: Add driver for Zynq
ARM: zynq: Enable pinctrl
ARM: zynq: DT: Add pinctrl information
pinctrl: qcom-spmi-gpio: Migrate to pinconf-generic
.../bindings/pinctrl/xlnx,zynq-pinctrl.txt | 104 ++
arch/arm/boot/dts/zynq-7000.dtsi | 8 +-
arch/arm/boot/dts/zynq-zc702.dts | 181 +++
arch/arm/boot/dts/zynq-zc706.dts | 152 +++
arch/arm/mach-zynq/Kconfig | 2 +
drivers/pinctrl/Kconfig | 8 +
drivers/pinctrl/Makefile | 1 +
drivers/pinctrl/nomadik/pinctrl-abx500.c | 2 +-
drivers/pinctrl/pinconf-generic.c | 199 ++--
drivers/pinctrl/pinconf.c | 4 +-
drivers/pinctrl/pinconf.h | 22 +-
drivers/pinctrl/pinctrl-rockchip.c | 2 +-
drivers/pinctrl/pinctrl-tz1090-pdc.c | 2 +-
drivers/pinctrl/pinctrl-tz1090.c | 2 +-
drivers/pinctrl/pinctrl-zynq.c | 1176 ++++++++++++++++++++
drivers/pinctrl/qcom/pinctrl-spmi-gpio.c | 125 +--
drivers/pinctrl/sh-pfc/pinctrl.c | 2 +-
include/linux/pinctrl/pinconf-generic.h | 29 +
include/linux/pinctrl/pinctrl.h | 9 +
19 files changed, 1808 insertions(+), 222 deletions(-)
create mode 100644
Documentation/devicetree/bindings/pinctrl/xlnx,zynq-pinctrl.txt
create mode 100644 drivers/pinctrl/pinctrl-zynq.c
--
2.2.1.1.gb42cc81
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
