On Mon, 12 Jan 2015 09:16:36 +0100 Arnaud Ebalard <[email protected]> wrote:
> This patch adds support for Abracon AB-RTCMC-32.768kHz-B5ZE-S3
> RTC/Calendar module w/ I2C interface.
>
> This supports includes RTC time reading and setting, Alarm (1 minute
> accuracy) reading and setting, and battery low detection. The device
> also supports frequency adjustment and two timers but those features
> are currently not implemented in this driver. Due to alarm accuracy
> limitation (and current lack of timer support in the driver), UIE
> mode is not supported.
>
> ...
>
> +static int abb5zes3_probe(struct i2c_client *client,
> + const struct i2c_device_id *id)
> +{
> + struct device *dev = &client->dev;
> + struct abb5zes3_rtc_data *data;
> + struct regmap *regmap;
> + int ret;
> +
> + if (!i2c_check_functionality(client->adapter, I2C_FUNC_I2C |
> + I2C_FUNC_SMBUS_BYTE_DATA |
> + I2C_FUNC_SMBUS_I2C_BLOCK))
> + return -ENODEV;
> +
> + regmap = devm_regmap_init_i2c(client, &abb5zes3_rtc_regmap_config);
> + if (IS_ERR(regmap)) {
> + ret = PTR_ERR(regmap);
> + dev_err(dev, "%s: regmap allocation failed: %d\n",
> + __func__, ret);
> + return ret;
> + }
> +
> + ret = abb5zes3_i2c_validate_chip(regmap);
> + if (ret)
> + return ret;
> +
> + data = devm_kzalloc(dev, sizeof(*data), GFP_KERNEL);
> + if (!data)
> + return -ENOMEM;
> +
> + mutex_init(&data->lock);
> + data->regmap = regmap;
> + dev_set_drvdata(dev, data);
> +
> + ret = abb5zes3_rtc_check_setup(dev);
> + if (ret)
> + return ret;
> +
> + if (client->irq > 0) {
> + ret = devm_request_threaded_irq(dev, client->irq, NULL,
> + _abb5zes3_rtc_interrupt,
> + IRQF_SHARED|IRQF_ONESHOT,
> + DRV_NAME, client);
> + if (!ret) {
> + device_init_wakeup(dev, true);
> + data->irq = client->irq;
> + dev_dbg(dev, "%s: irq %d used by RTC\n", __func__,
> + client->irq);
> + } else {
> + dev_err(dev, "%s: irq %d unavailable (%d)\n",
> + __func__, client->irq, ret);
> + }
> + }
> +
> + data->rtc = devm_rtc_device_register(dev, DRV_NAME, &rtc_ops,
> + THIS_MODULE);
> + ret = PTR_ERR_OR_ZERO(data->rtc);
If devm_request_threaded_irq() returned an error, we just wiped that
out here. I'd suggest consistently adding a few "return ret;"
statements in this function.
Something like this?
---
a/drivers/rtc/rtc-ab-b5ze-s3.c~rtc-add-support-for-abracon-ab-rtcmc-32768khz-b5ze-s3-i2c-rtc-chip-fix
+++ a/drivers/rtc/rtc-ab-b5ze-s3.c
@@ -695,6 +695,7 @@ static int abb5zes3_probe(struct i2c_cli
} else {
dev_err(dev, "%s: irq %d unavailable (%d)\n",
__func__, client->irq, ret);
+ return ret;
}
}
@@ -704,7 +705,7 @@ static int abb5zes3_probe(struct i2c_cli
if (ret) {
dev_err(dev, "%s: unable to register RTC device (%d)\n",
__func__, ret);
- device_init_wakeup(dev, false);
+ goto err;
}
/*
@@ -718,12 +719,17 @@ static int abb5zes3_probe(struct i2c_cli
/* Enable battery low detection interrupt if battery not already low */
if (!data->battery_low && data->irq) {
ret = _abb5zes3_rtc_battery_low_irq_enable(regmap, true);
- if (ret)
+ if (ret) {
dev_err(dev, "%s: enabling battery low interrupt "
"generation failed (%d)\n", __func__, ret);
+ goto err;
+ }
}
return ret;
+err:
+ device_init_wakeup(dev, false);
+ return ret;
}
static int abb5zes3_remove(struct i2c_client *client)
_
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
