The EMAC needs SRAM block A3_A4 being mapped to EMAC peripheral to
work. This is done by the bootloader most of the time, but U-Boot
Falcon Mode, for example, skips emac initialization and SRAM would
stay mapped to the CPU.

Signed-off-by: Jens Kuske <[email protected]>
---
 drivers/net/ethernet/allwinner/Kconfig      |  1 +
 drivers/net/ethernet/allwinner/sun4i-emac.c | 18 ++++++++++++++++++
 2 files changed, 19 insertions(+)

diff --git a/drivers/net/ethernet/allwinner/Kconfig 
b/drivers/net/ethernet/allwinner/Kconfig
index d8d95d4..508a288 100644
--- a/drivers/net/ethernet/allwinner/Kconfig
+++ b/drivers/net/ethernet/allwinner/Kconfig
@@ -28,6 +28,7 @@ config SUN4I_EMAC
        select MII
        select PHYLIB
        select MDIO_SUN4I
+       select MFD_SYSCON
         ---help---
           Support for Allwinner A10 EMAC ethernet driver.
 
diff --git a/drivers/net/ethernet/allwinner/sun4i-emac.c 
b/drivers/net/ethernet/allwinner/sun4i-emac.c
index 1fcd556..86c891d 100644
--- a/drivers/net/ethernet/allwinner/sun4i-emac.c
+++ b/drivers/net/ethernet/allwinner/sun4i-emac.c
@@ -18,6 +18,8 @@
 #include <linux/gpio.h>
 #include <linux/interrupt.h>
 #include <linux/irq.h>
+#include <linux/mfd/syscon.h>
+#include <linux/mfd/syscon/sun4i-sc.h>
 #include <linux/mii.h>
 #include <linux/module.h>
 #include <linux/netdevice.h>
@@ -28,6 +30,7 @@
 #include <linux/of_platform.h>
 #include <linux/platform_device.h>
 #include <linux/phy.h>
+#include <linux/regmap.h>
 
 #include "sun4i-emac.h"
 
@@ -78,6 +81,7 @@ struct emac_board_info {
 
        struct phy_device       *phy_dev;
        struct device_node      *phy_node;
+       struct regmap           *sc;
        unsigned int            link;
        unsigned int            speed;
        unsigned int            duplex;
@@ -862,6 +866,18 @@ static int emac_probe(struct platform_device *pdev)
                goto out;
        }
 
+       /* Map SRAM_A3_A4 to EMAC */
+       db->sc = syscon_regmap_lookup_by_compatible(
+                                               "allwinner,sun4i-a10-syscon");
+       if (IS_ERR(db->sc)) {
+               dev_err(&pdev->dev, "failed to find syscon regmap\n");
+               ret = PTR_ERR(db->sc);
+               goto out;
+       }
+
+       regmap_update_bits(db->sc, SUN4I_SC1, SUN4I_SC1_SRAM_A3_A4_MAP_MASK,
+                                               SUN4I_SC1_SRAM_A3_A4_MAP_EMAC);
+
        /* Read MAC-address from DT */
        mac_addr = of_get_mac_address(np);
        if (mac_addr)
@@ -910,7 +926,9 @@ out:
 static int emac_remove(struct platform_device *pdev)
 {
        struct net_device *ndev = platform_get_drvdata(pdev);
+       struct emac_board_info *db = netdev_priv(ndev);
 
+       regmap_update_bits(db->sc, SUN4I_SC1, SUN4I_SC1_SRAM_A3_A4_MAP_MASK, 0);
        unregister_netdev(ndev);
        free_netdev(ndev);
 
-- 
2.2.2

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to [email protected]
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Reply via email to