On Tue, Feb 03, 2015 at 06:22:00AM +0800, Chen-Yu Tsai wrote: > Hi everyone, > > This is v4 of the sun9i A80 USB host support series. > > Changes since v3: > > - Dropped patches merged. > > - Moved reg_usb3_vbus into the optimus board dts > > - Dropped ohci1 from A80 dtsi. > > Cover letter from v3: > > This series adds USB host controller (EHCI/OHCI) support for the Allwinner > A80 SoC. The A80 has 3 pairs of host controllers and USB PHYs. The PHYs, > unlike in previous SoCs, do not have low level control registers anymore. > > As such, this series forgoes the original phy-sun4i-usb driver, and adds > a new, simpler driver for the USB PHYs. It may be possible to merge the > two, but given that work is being done on the OTG front for the earlier > SoCs, it may be better to merge them after support is complete. > > EHCI/OHCI0 corresponds to USB1 DP/DM pins; EHCI1 only has HSIC support; > EHCI2/OHCI/2 is USB2 DP/DM externally. External pins labeled USB0 are > for the USB 3.0 OTG controller.
Applied 2-5. Thanks! Maxime -- Maxime Ripard, Free Electrons Embedded Linux, Kernel and Android engineering http://free-electrons.com
signature.asc
Description: Digital signature
