On 02/10/2015 10:48 PM, Felipe Balbi wrote:

diff --git a/drivers/usb/phy/Kconfig b/drivers/usb/phy/Kconfig
index c6d0c8e..405a3d0 100644
--- a/drivers/usb/phy/Kconfig
+++ b/drivers/usb/phy/Kconfig
@@ -173,6 +173,15 @@ config USB_MXS_PHY

          MXS Phy is used by some of the i.MX SoCs, for example imx23/28/6x.

+config USB_HI6220_PHY
+       tristate "hi6220 USB PHY support"
+       select USB_PHY
+       select MFD_SYSCON
+       help
+         Enable this to support the HISILICON HI6220 USB PHY.
+
+         To compile this driver as a module, choose M here.
+
  config USB_RCAR_PHY
        tristate "Renesas R-Car USB PHY support"
        depends on USB || USB_GADGET
diff --git a/drivers/usb/phy/Makefile b/drivers/usb/phy/Makefile
index 75f2bba..00172d3 100644
--- a/drivers/usb/phy/Makefile
+++ b/drivers/usb/phy/Makefile
@@ -18,6 +18,7 @@ obj-$(CONFIG_SAMSUNG_USBPHY)          += phy-samsung-usb.o
  obj-$(CONFIG_TWL6030_USB)             += phy-twl6030-usb.o
  obj-$(CONFIG_USB_EHCI_TEGRA)          += phy-tegra-usb.o
  obj-$(CONFIG_USB_GPIO_VBUS)           += phy-gpio-vbus-usb.o
+obj-$(CONFIG_USB_HI6220_PHY)           += phy-hi6220-usb.o

new drivers only on drivers/phy/, sorry.

One more quesiton.
Should I also move Documentation/devicetree/bindings/usb/hi6220-usb.txt to Documentation/devicetree/bindings/phy/?

I describing both usb controller and phy here, is it still should be put under Documentation/devicetree/bindings/usb/?

Hisilicon hi6220 SoC USB controller
-----------------------------

usb controller is inherited from dwc2, refer dwc2.txt
-----

Required properties:
- compatible: "hisilicon,hi6220-usb"
Refer to dwc2.txt for dwc2 usb properties


PHY:
-----

Required properties:
- compatible: "hisilicon,hi6220-usb-phy"
- vcc-supply: phandle to the regulator that provides power to the PHY.
- clocks: phandle and clock specifier of the PHY clock.
- hisilicon,peripheral-syscon: phandle of syscon used to control peripheral.
- hisilicon,vbus-gpios: gpio of detecting vbus.
- hisilicon,id-gpios: gpio of detecting id.

Example:

        sys_ctrl: syscon@f7030000 {
                compatible = "hisilicon,sysctrl", "syscon";
                reg = <0x0 0xf7030000 0x0 0x1000>;
        };

        usb_phy: usb-phy {
                compatible = "hisilicon,hi6220-usb-phy";
                vcc-supply = <&fixed_5v_hub>;
                hisilicon,vbus-gpios = <&gpio2 6 0>;
                hisilicon,id-gpios = <&gpio2 5 0>;
                hisilicon,peripheral-syscon = <&sys_ctrl>;
                clocks = <&clock_sys HI6220_USBOTG_HCLK>;
        };

        usb: usb@f72c0000 {
                compatible = "hisilicon,hi6220-usb";
                reg = <0x0 0xf72c0000 0x0 0x40000>;
                phys = <&usb_phy>;
                dr_mode = "otg";
                g-use-dma;
                g-rx-fifo-size = <512>;
                g-np-tx-fifo-size = <128>;
                g-tx-fifo-size = <128>;
                interrupts = <0 77 0x4>;
        };




--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to [email protected]
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Reply via email to