Add OCM node for all zynq boards. OCM location can changed but for all current boards this is the location where OCM is.`
Signed-off-by: Michal Simek <[email protected]> --- This patch is done based on discussion here. https://lkml.org/lkml/2014/12/1/396 There are some ways how to do it. OCM location can be changed but board DTS files can easily rewrite it. The problem which there is that node has address in it but maybe someone can suggest better solution. --- arch/arm/boot/dts/zynq-7000.dtsi | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/arch/arm/boot/dts/zynq-7000.dtsi b/arch/arm/boot/dts/zynq-7000.dtsi index a5cd2eda3edf..d55a8b365a6c 100644 --- a/arch/arm/boot/dts/zynq-7000.dtsi +++ b/arch/arm/boot/dts/zynq-7000.dtsi @@ -150,6 +150,11 @@ reg = <0xf8006000 0x1000>; }; + ocm: sram@fffc0000 { + compatible = "mmio-sram"; + reg = <0xfffc0000 0x10000>; + }; + uart0: serial@e0000000 { compatible = "xlnx,xuartps", "cdns,uart-r1p8"; status = "disabled"; -- 1.8.2.3 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html
