Hi Srini, On 02/23/15 09:55, Srinivas Kandagatla wrote: > From: Nicolas Dechesne <[email protected]> > > This patch adds PCIE support to APQ8064, tested with Ethernet on Compulab > QS600 board. > > Signed-off-by: Nicolas Dechesne <[email protected]>
Thanks for submitting these! I currently have a hard time submitting anything... Acked-by: Igor Grinberg <[email protected]> > --- > arch/arm/boot/dts/qcom-apq8064-cm-qs600.dts | 19 +++++++++++++++++++ > 1 file changed, 19 insertions(+) > > diff --git a/arch/arm/boot/dts/qcom-apq8064-cm-qs600.dts > b/arch/arm/boot/dts/qcom-apq8064-cm-qs600.dts > index 5d75666..6e62f24 100644 > --- a/arch/arm/boot/dts/qcom-apq8064-cm-qs600.dts > +++ b/arch/arm/boot/dts/qcom-apq8064-cm-qs600.dts > @@ -1,4 +1,5 @@ > #include "qcom-apq8064-v2.0.dtsi" > +#include <dt-bindings/gpio/gpio.h> > > / { > model = "CompuLab CM-QS600"; > @@ -40,6 +41,24 @@ > }; > }; > > + /* on board fixed 3.3v supply */ > + v3p3_pcieclk: v3p3-pcieclk { > + compatible = "regulator-fixed"; > + regulator-name = "PCIE V3P3"; > + regulator-min-microvolt = <3300000>; > + regulator-max-microvolt = <3300000>; > + regulator-always-on; > + }; > + > + pci@1b500000 { > + status = "ok"; > + pcie-clk-supply = <&v3p3_pcieclk>; > + avdd-supply = <&pm8921_s3>; > + vdd-supply = <&pm8921_lvs6>; > + qcom,external-phy-refclk; > + reset-gpio = <&tlmm_pinmux 27 GPIO_ACTIVE_LOW>; > + }; > + > amba { > /* eMMC */ > sdcc1: sdcc@12400000 { > -- Regards, Igor. -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html
