All IPQ806x based boards will include this file and will need a way to identify each GSBI device. So this change is labelling them all to make reference from board specific file easier.
Signed-off-by: Mathieu Olivari <[email protected]> --- arch/arm/boot/dts/qcom-ipq8064.dtsi | 14 +++++++------- 1 file changed, 7 insertions(+), 7 deletions(-) diff --git a/arch/arm/boot/dts/qcom-ipq8064.dtsi b/arch/arm/boot/dts/qcom-ipq8064.dtsi index d01f618..ffa5b5e 100644 --- a/arch/arm/boot/dts/qcom-ipq8064.dtsi +++ b/arch/arm/boot/dts/qcom-ipq8064.dtsi @@ -140,7 +140,7 @@ ranges; status = "disabled"; - serial@12490000 { + uart2: serial@12490000 { compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm"; reg = <0x12490000 0x1000>, <0x12480000 0x1000>; @@ -150,7 +150,7 @@ status = "disabled"; }; - i2c@124a0000 { + i2c2: i2c@124a0000 { compatible = "qcom,i2c-qup-v1.1.1"; reg = <0x124a0000 0x1000>; interrupts = <0 196 0>; @@ -175,7 +175,7 @@ ranges; status = "disabled"; - serial@16340000 { + uart4: serial@16340000 { compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm"; reg = <0x16340000 0x1000>, <0x16300000 0x1000>; @@ -185,7 +185,7 @@ status = "disabled"; }; - i2c@16380000 { + i2c4: i2c@16380000 { compatible = "qcom,i2c-qup-v1.1.1"; reg = <0x16380000 0x1000>; interrupts = <0 153 0>; @@ -209,7 +209,7 @@ ranges; status = "disabled"; - serial@1a240000 { + uart5: serial@1a240000 { compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm"; reg = <0x1a240000 0x1000>, <0x1a200000 0x1000>; @@ -219,7 +219,7 @@ status = "disabled"; }; - i2c@1a280000 { + i2c5: i2c@1a280000 { compatible = "qcom,i2c-qup-v1.1.1"; reg = <0x1a280000 0x1000>; interrupts = <0 155 0>; @@ -232,7 +232,7 @@ #size-cells = <0>; }; - spi@1a280000 { + spi5: spi@1a280000 { compatible = "qcom,spi-qup-v1.1.1"; reg = <0x1a280000 0x1000>; interrupts = <0 155 0>; -- 1.9.1 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html
