On Wed, 25 Feb 2015, Peter Griffin wrote: > The example is wrong in that the phys property should take a > phandle to the phy port. > > Also with the changing over to generic PHY type constants we also > update this as well. > > Signed-off-by: Peter Griffin <[email protected]> > --- > Documentation/devicetree/bindings/ata/ahci-st.txt | 4 ++-- > 1 file changed, 2 insertions(+), 2 deletions(-)
Acked-by: Lee Jones <[email protected]> > diff --git a/Documentation/devicetree/bindings/ata/ahci-st.txt > b/Documentation/devicetree/bindings/ata/ahci-st.txt > index 0574a77..1331202 100644 > --- a/Documentation/devicetree/bindings/ata/ahci-st.txt > +++ b/Documentation/devicetree/bindings/ata/ahci-st.txt > @@ -11,7 +11,7 @@ Required properties: > - reset-names : Associated names must be; "pwr-dwn" and "sw-rst" > - clocks : The phandle for the clock > - clock-names : Associated name must be; "ahci_clk" > - - phys : The phandle for the PHY device > + - phys : The phandle for the PHY port > - phy-names : Associated name must be; "ahci_phy" > > Example: > @@ -21,7 +21,7 @@ Example: > reg = <0xfe380000 0x1000>; > interrupts = <GIC_SPI 157 IRQ_TYPE_NONE>; > interrupt-names = "hostc"; > - phys = <&miphy365x_phy MIPHY_PORT_0 MIPHY_TYPE_SATA>; > + phys = <&phy_port0 PHY_TYPE_SATA>; > phy-names = "ahci_phy"; > resets = <&powerdown STIH416_SATA0_POWERDOWN>, > <&softreset STIH416_SATA0_SOFTRESET>; -- Lee Jones Linaro STMicroelectronics Landing Team Lead Linaro.org │ Open source software for ARM SoCs Follow Linaro: Facebook | Twitter | Blog -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html
