On Wed, 2015-02-25 at 21:01 +0000, Arun Ramamurthy wrote: > Added code to support FBIOPAN_DISPLAY. Also added yres_virtual > parameter to device tree to set the virtual y resolution > > Reviewed-by: Ray Jui <[email protected]> > Reviewed-by: Scott Branden <[email protected]> > Signed-off-by: Arun Ramamurthy <[email protected]> > --- > .../devicetree/bindings/video/arm,pl11x.txt | 4 +++ > drivers/video/fbdev/amba-clcd.c | 31 > +++++++++++++++++++--- > 2 files changed, 31 insertions(+), 4 deletions(-) > > diff --git a/Documentation/devicetree/bindings/video/arm,pl11x.txt > b/Documentation/devicetree/bindings/video/arm,pl11x.txt > index 14d6f87..2262cdb 100644 > --- a/Documentation/devicetree/bindings/video/arm,pl11x.txt > +++ b/Documentation/devicetree/bindings/video/arm,pl11x.txt > @@ -50,6 +50,10 @@ Optional properties: > display mode, data is driven onto the LCD data lines at the > programmed edge of CLCP when CLAC is in its active state. > > +- yres_virtual: Virtual Y resolution, > + It can be used to configure a virtual y resolution. It > + must be a value larger than the actual y resolution. > +
I'm not sure about this... The word "virtual" never works well with device tree nodes defined as "hardware description". I understand what you're doing, but adding this property to the display controller's node doesn't sound right. How does this describe hardware? If anywhere, it's more like a job for the panel node? Pawel -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html
