On 09/02/15 16:06, Scott Branden wrote:
> Add device tree binding documentation for IPROC SDHCI driver.
>
> Acked-by: Ray Jui <[email protected]>
> Signed-off-by: Corneliu Doban <[email protected]>
> Signed-off-by: Scott Branden <[email protected]>
> ---
> .../devicetree/bindings/mmc/brcm,sdhci-iproc.txt | 23
> ++++++++++++++++++++++
> 1 file changed, 23 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/mmc/brcm,sdhci-iproc.txt
>
> diff --git a/Documentation/devicetree/bindings/mmc/brcm,sdhci-iproc.txt
> b/Documentation/devicetree/bindings/mmc/brcm,sdhci-iproc.txt
> new file mode 100644
> index 0000000..72cc9cc
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/mmc/brcm,sdhci-iproc.txt
> @@ -0,0 +1,23 @@
> +Broadcom IPROC SDHCI controller
> +
> +This file documents differences between the core properties described
> +by mmc.txt and the properties that represent the IPROC SDHCI controller.
> +
> +Required properties:
> +- compatible : Should be "brcm,sdhci-iproc-cygnus".
> +- clocks : The clock feeding the SDHCI controller.
> +
> +Optional properties:
> + - sdhci,auto-cmd12: specifies that controller should use auto CMD12.
Formatting is a little different here, there is one too many space to
begin the line.
> +
> +Example:
> +
> +sdhci0: sdhci@0x18041000 {
0x is typically dropped from this part, to only appear in the "reg"
property.
> + compatible = "brcm,sdhci-iproc-cygnus";
> + reg = <0x18041000 0x100>;
> + interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&lcpll0_clks BCM_CYGNUS_LCPLL0_SDIO_CLK>;
> + bus-width = <4>;
> + sdhci,auto-cmd12;
> + no-1-8-v;
> +};
>
Unless there is a re-spin, I will fix this myself while applying this
patch to devicetree/next.
Thanks
--
Florian
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
