On 03/02/2015 10:03 PM, Russell King wrote:
From: Rabeeh Khoury <[email protected]>Setup pwm lines as follows - pwm1: In case HummingBoard base carrier; this pin drives through a serial capacitor the mono out of the audio jack. In case HummingBoard pro the this pad can be reached by wiring to C8 capacitors on the board. pwm2: Setup pwm2 on gpio-1 but leave the default function of the iopad as a gpio. The user can change the io pad mux in user space and therefore use this function on gpio-1 (pin number 7 on the 26 pin header). pwm3,pwm4: unused Signed-off-by: Rabeeh Khoury <[email protected]> [tweaked alias for pwm pinctrl group --rmk] Signed-off-by: Russell King <[email protected]> --- For acks please.
Ack.
arch/arm/boot/dts/imx6qdl-hummingboard.dtsi | 23 +++++++++++++++++++++++ 1 file changed, 23 insertions(+) diff --git a/arch/arm/boot/dts/imx6qdl-hummingboard.dtsi b/arch/arm/boot/dts/imx6qdl-hummingboard.dtsi index 93588c987d2c..c0dc5948fa3c 100644 --- a/arch/arm/boot/dts/imx6qdl-hummingboard.dtsi +++ b/arch/arm/boot/dts/imx6qdl-hummingboard.dtsi @@ -164,6 +164,10 @@ >; };+ pinctrl_hummingboard_pwm1: pwm1grp {+ fsl,pins = <MX6QDL_PAD_DISP0_DAT8__PWM1_OUT 0x1b0b1>; + }; + pinctrl_hummingboard_spdif: hummingboard-spdif { fsl,pins = <MX6QDL_PAD_GPIO_17__SPDIF_OUT 0x13091>; }; @@ -203,6 +207,25 @@ }; };+&pwm1 {+ pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_hummingboard_pwm1>; + status = "okay"; +}; + +&pwm2 { + pinctrl-names = "default"; + status = "okay"; +}; + +&pwm3 { + status = "disabled"; +}; + +&pwm4 { + status = "disabled"; +}; + &spdif { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_hummingboard_spdif>;
-- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html
