On Thu, 02 Apr 2015, Krzysztof Kozlowski wrote:
> The RTC on S2MPS11 is the same as S2MPS14. However interrupt numbers of
> RTC alarms 0 and 1 were inversed between these two devices. So when
> rtc-s5m driver requested S2MPS14_IRQ_RTCA0 interrupt, it matched to
> S2MPS11_IRQ_RTCA1, not RTCA0.
>
> Fix this by using consistent RTC alarm interrupt numbers and adding a
> BUILD_BUG_ON for future generations.
>
> Signed-off-by: Krzysztof Kozlowski <[email protected]>
> ---
> drivers/mfd/sec-irq.c | 14 ++++++++++----
> include/linux/mfd/samsung/irq.h | 2 +-
> 2 files changed, 11 insertions(+), 5 deletions(-)
Applied, thanks.
> diff --git a/drivers/mfd/sec-irq.c b/drivers/mfd/sec-irq.c
> index ba86a918c2da..806fa8dbb22d 100644
> --- a/drivers/mfd/sec-irq.c
> +++ b/drivers/mfd/sec-irq.c
> @@ -61,14 +61,14 @@ static const struct regmap_irq s2mps11_irqs[] = {
> .reg_offset = 1,
> .mask = S2MPS11_IRQ_RTC60S_MASK,
> },
> - [S2MPS11_IRQ_RTCA0] = {
> - .reg_offset = 1,
> - .mask = S2MPS11_IRQ_RTCA0_MASK,
> - },
> [S2MPS11_IRQ_RTCA1] = {
> .reg_offset = 1,
> .mask = S2MPS11_IRQ_RTCA1_MASK,
> },
> + [S2MPS11_IRQ_RTCA0] = {
> + .reg_offset = 1,
> + .mask = S2MPS11_IRQ_RTCA0_MASK,
> + },
> [S2MPS11_IRQ_SMPL] = {
> .reg_offset = 1,
> .mask = S2MPS11_IRQ_SMPL_MASK,
> @@ -484,6 +484,12 @@ int sec_irq_init(struct sec_pmic_dev *sec_pmic)
> return ret;
> }
>
> + /*
> + * The rtc-s5m driver requests S2MPS14_IRQ_RTCA0 also for S2MPS11
> + * so the interrupt number must be consistent.
> + */
> + BUILD_BUG_ON(((enum s2mps14_irq)S2MPS11_IRQ_RTCA0) !=
> S2MPS14_IRQ_RTCA0);
> +
> return 0;
> }
>
> diff --git a/include/linux/mfd/samsung/irq.h b/include/linux/mfd/samsung/irq.h
> index f35af7361b60..667aa40486dd 100644
> --- a/include/linux/mfd/samsung/irq.h
> +++ b/include/linux/mfd/samsung/irq.h
> @@ -74,8 +74,8 @@ enum s2mps11_irq {
> S2MPS11_IRQ_MRB,
>
> S2MPS11_IRQ_RTC60S,
> - S2MPS11_IRQ_RTCA0,
> S2MPS11_IRQ_RTCA1,
> + S2MPS11_IRQ_RTCA0,
> S2MPS11_IRQ_SMPL,
> S2MPS11_IRQ_RTC1S,
> S2MPS11_IRQ_WTSR,
--
Lee Jones
Linaro STMicroelectronics Landing Team Lead
Linaro.org │ Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
