Add support for detecting a vmlinuz.bin appended dtb and overriding
the boot arguments to match the UHI interface.

To ensure _edata / __apendend_dtb points to the actual end of the
binary, align the data section to 16 bytes instead of the address
cursor.

Due to ld.script not going through the preprocessor, we can't check
for MIPS_ZBOOT_APPENDED_DTB being enabled, so always reserve space
for it. It should have no consequences for booting without it enabled
except 1 MiB more ram usage during the uncompressing stage.

Signed-off-by: Jonas Gorski <[email protected]>
---
 arch/mips/Kconfig                   |   18 ++++++++++++++++++
 arch/mips/boot/compressed/head.S    |   16 ++++++++++++++++
 arch/mips/boot/compressed/ld.script |    6 +++++-
 3 files changed, 39 insertions(+), 1 deletion(-)

diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig
index 0986619..8aef377 100644
--- a/arch/mips/Kconfig
+++ b/arch/mips/Kconfig
@@ -2697,6 +2697,24 @@ choice
                  look like a DTB header after a reboot if no actual DTB is 
appended
                  to vmlinux.bin.  Do not leave this option active in a 
production kernel
                  if you don't intend to always append a DTB.
+
+       config MIPS_ZBOOT_APPENDED_DTB
+               bool "vmlinuz.bin"
+               depends on SYS_SUPPORTS_ZBOOT
+               help
+                 With this option, the boot code will look for a device tree 
binary
+                 DTB) appended to raw vmlinuz.bin (with decompressor).
+                 (e.g. cat vmlinuz.bin <filename>.dtb > vmlinuz_w_dtb).
+
+                 This is meant as a backward compatibility convenience for 
those
+                 systems with a bootloader that can't be upgraded to 
accommodate
+                 the documented boot protocol using a device tree.
+
+                 Beware that there is very little in terms of protection 
against
+                 this option being confused by leftover garbage in memory that 
might
+                 look like a DTB header after a reboot if no actual DTB is 
appended
+                 to vmlinuz.bin.  Do not leave this option active in a 
production kernel
+                 if you don't intend to always append a DTB.
 endchoice
 
 endmenu
diff --git a/arch/mips/boot/compressed/head.S b/arch/mips/boot/compressed/head.S
index 409cb48..c580e85 100644
--- a/arch/mips/boot/compressed/head.S
+++ b/arch/mips/boot/compressed/head.S
@@ -25,6 +25,22 @@ start:
        move    s2, a2
        move    s3, a3
 
+#ifdef CONFIG_MIPS_ZBOOT_APPENDED_DTB
+       PTR_LA  t0, __appended_dtb
+#ifdef CONFIG_CPU_BIG_ENDIAN
+       li      t1, 0xd00dfeed
+#else
+       li      t1, 0xedfe0dd0
+#endif
+       lw      t2, (t0)
+       bne     t1, t2, not_found
+        nop
+
+       move    s1, t0
+       PTR_LI  s0, -2
+not_found:
+#endif
+
        /* Clear BSS */
        PTR_LA  a0, _edata
        PTR_LA  a2, _end
diff --git a/arch/mips/boot/compressed/ld.script 
b/arch/mips/boot/compressed/ld.script
index 5a33409..2ed08fb 100644
--- a/arch/mips/boot/compressed/ld.script
+++ b/arch/mips/boot/compressed/ld.script
@@ -29,8 +29,12 @@ SECTIONS
                *(.image)
                __image_end = .;
                CONSTRUCTORS
+               . = ALIGN(16);
        }
-       . = ALIGN(16);
+       __appended_dtb = .;
+       /* leave space for appended DTB */
+       . += 0x100000;
+
        _edata = .;
        /* End of data section */
 
-- 
1.7.10.4
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to [email protected]
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Reply via email to