Add DT binding documentation for lpc1850-ccu clk driver.
Signed-off-by: Joachim Eastwood <[email protected]>
---
.../devicetree/bindings/clock/lpc1850-ccu.txt | 146 +++++++++++++++++++++
1 file changed, 146 insertions(+)
create mode 100644 Documentation/devicetree/bindings/clock/lpc1850-ccu.txt
diff --git a/Documentation/devicetree/bindings/clock/lpc1850-ccu.txt
b/Documentation/devicetree/bindings/clock/lpc1850-ccu.txt
new file mode 100644
index 000000000000..aca46805c10a
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/lpc1850-ccu.txt
@@ -0,0 +1,146 @@
+* NXP LPC1850 Clock Control Unit (CCU)
+
+Each CGU base clock has several clock branches which can be turned on
+or off independently by the Clock Control Units CCU1 or CCU2. The
+branch clocks are distributed between CCU1 and CCU2.
+
+ - Above text taken from NXP LPC1850 User Manual.
+
+This binding uses the common clock binding:
+ Documentation/devicetree/bindings/clock/clock-bindings.txt
+
+Required properties:
+- compatible:
+ Should be "nxp,lpc1850-ccu"
+- reg:
+ Shall define the base and range of the address space
+ containing clock control registers
+- #clock-cells:
+ Shall have value <1>. The permitted clock-specifier values
+ are the branch clock names defined in table below.
+- clocks:
+ Shall contain a list of phandles for the base clocks routed
+ from the CGU to the specific CCU. See mapping of base clocks
+ and CCU in table below.
+
+Which brach clocks that are available on the CCU depends on the
+specific LPC part.
+
+CCU1 branch clocks:
+Base clock Branch clock Description
+BASE_APB3_CLK CLK_APB3_BUS APB3 bus clock.
+ CLK_APB3_I2C1 Clock to the I2C1 register interface
+ and I2C1 peripheral clock.
+ CLK_APB3_DAC Clock to the DAC register interface.
+ CLK_APB3_ADC0 Clock to the ADC0 register interface
+ and ADC0 peripheral clock.
+ CLK_APB3_ADC1 Clock to the ADC1 register interface
+ and ADC1 peripheral clock.
+ CLK_APB3_CAN0 Clock to the C_CAN0 register interface
+ and C_CAN0 peripheral clock.
+BASE_APB1_CLK CLK_APB1_BUS APB1 bus clock.
+ CLK_APB1_MOTOCON_PWM Clock to the PWM Motor control block and
+ PWM Motor control peripheral clock.
+ CLK_APB1_I2C0 Clock to the I2C0 register interface and
+ I2C0 peripheral clock.
+ CLK_APB1_I2S Clock to the I2S0 and I2S1 register
interfaces
+ and I2S0 and I2S1 peripheral clock.
+ CLK_APB1_CAN1 Clock to the C_CAN1 register interface
and
+ C_CAN1 peripheral clock.
+BASE_SPIFI_CLK CLK_SPIFI Clock for the SPIFI SCKI clock input.
+BASE_CPU_CLK CLK_CPU_BUS M4 bus clock.
+ CLK_CPU_SPIFI Clock to the SPIFI register interface.
+ CLK_CPU_GPIO Clock to the GPIO register interface
+ CLK_CPU_LCD Clock to the LCD register interface.
+ CLK_CPU_ETHERNET Clock to the Ethernet register
interface.
+ CLK_CPU_USB0 Clock to the USB0 register interface.
+ CLK_CPU_EMC Clock to the External memory controller.
+ CLK_CPU_SDIO Clock to the SD/MMC register interface.
+ CLK_CPU_DMA Clock to the DMA register interface.
+ CLK_CPU_CORE Clock to the Cortex-M core
+ CLK_CPU_SCT Clock to the SCT register interface.
+ CLK_CPU_USB1 Clock to the USB1 register interface.
+ CLK_CPU_EMC_DIV Clock to the EMC with clock divider.
+ CLK_CPU_FLASHA Clock to the flash bank A.
+ CLK_CPU_FLASHB Clock to the flash bank B.
+ CLK_CPU_M0APP Clock to the M0APP coprocessor.
+ CLK_CPU_ADCHS Clock to the ADCHS.
+ CLK_CPU_EEPROM Clock to the EEPROM.
+ CLK_CPU_WWDT Clock to the WWDT register interface.
+ CLK_CPU_UART0 Clock to the USART0 register interface.
+ CLK_CPU_UART1 Clock to the UART1 register interface.
+ CLK_CPU_SSP0 Clock to the SSP0 register interface.
+ CLK_CPU_TIMER0 Clock to the timer0 register interface
and
+ timer0 peripheral clock.
+ CLK_CPU_TIMER1 Clock to the timer1 register interface
and
+ timer1 peripheral clock.
+ CLK_CPU_SCU Clock to the System control unit
register interface.
+ CLK_CPU_CREG Clock to the CREG register interface.
+ CLK_CPU_RITIMER Clock to the RI timer register
interface and
+ RI timer peripheral clock.
+ CLK_CPU_UART2 Clock to the UART2 register interface.
+ CLK_CPU_UART3 Clock to the UART3 register interface.
+ CLK_CPU_TIMER2 Clock to the timer2 register interface
and
+ timer2 peripheral clock.
+ CLK_CPU_TIMER3 Clock to the timer3 register interface
and
+ timer3 peripheral clock.
+ CLK_CPU_SSP1 Clock to the SSP1 register interface.
+ CLK_CPU_QEI Clock to the QEI register interface and
+ QEI peripheral clock.
+BASE_PERIPH_CLK CLK_PERIPH_BUS Clock to the peripheral bus and
the
+ Cortex-M0 subsystem AHB multilayer
matrix.
+ CLK_PERIPH_CORE Clock to the Cortex-M0 subsystem core.
+ CLK_PERIPH_SGPIO Clock to the SGPIO interface.
+BASE_USB0_CLK CLK_USB0 USB0 peripheral clock.
+BASE_USB1_CLK CLK_USB1 USB1 peripheral clock.
+BASE_SPI_CLK CLK_SPI Clock to the SPI interface.
+BASE_ADCHS_CLK CLK_ADCHS ADCHS clock.
+
+CCU2 branch clocks:
+BASE_AUDIO_CLK CLK_AUDIO Audio system (I2S) clock.
+BASE_UART3_CLK CLK_APB2_UART3 USART3 peripheral clock.
+BASE_UART2_CLK CLK_APB2_UART2 USART2 peripheral clock.
+BASE_UART1_CLK CLK_APB0_UART1 UART1 peripheral clock.
+BASE_UART0_CLK CLK_APB0_UART0 USART0 peripheral clock.
+BASE_SSP1_CLK CLK_APB2_SSP1 SSP1 peripheral clock.
+BASE_SSP0_CLK CLK_APB0_SSP0 SSP0 peripheral clock.
+BASE_SDIO_CLK CLK_SDIO SD/MMC peripheral clock.
+
+Not all branch clocks are available on all LPC parts. Check the user
+manual for your specific part.
+
+Note that CLK_M3_x and CLK_M4_x have been renamed to CLK_CPU_x here
+be more generic since both LPC18xx (M3) and LPC43xx (M4) are
+supported.
+
+
+Example board file:
+
+soc {
+ ccu1: clock-controller@40051000 {
+ compatible = "nxp,lpc1850-ccu";
+ reg = <0x40051000 0x1000>;
+ #clock-cells = <1>;
+ clocks = <&cgu BASE_APB3_CLK>, <&cgu BASE_APB1_CLK>,
+ <&cgu BASE_SPIFI_CLK>, <&cgu BASE_CPU_CLK>,
+ <&cgu BASE_PERIPH_CLK>, <&cgu BASE_USB0_CLK>,
+ <&cgu BASE_USB1_CLK>, <&cgu BASE_SPI_CLK>;
+ };
+
+ ccu2: clock-controller@40052000 {
+ compatible = "nxp,lpc1850-ccu";
+ reg = <0x40052000 0x1000>;
+ #clock-cells = <1>;
+ clocks = <&cgu BASE_AUDIO_CLK>, <&cgu BASE_UART3_CLK>,
+ <&cgu BASE_UART2_CLK>, <&cgu BASE_UART1_CLK>,
+ <&cgu BASE_UART0_CLK>, <&cgu BASE_SSP1_CLK>,
+ <&cgu BASE_SSP0_CLK>, <&cgu BASE_SDIO_CLK>;
+ };
+
+ /* A user of CCU brach clocks */
+ uart1: serial@40082000 {
+ ...
+ clocks = <&ccu2 CLK_APB0_UART1>, <&ccu1 CLK_CPU_UART1>;
+ ...
+ };
+};
--
1.8.0
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
