Add device tree binding documentation for nxp,lpc1850-uart.
Signed-off-by: Joachim Eastwood <[email protected]>
---
.../bindings/serial/nxp,lpc1850-uart.txt | 28 ++++++++++++++++++++++
1 file changed, 28 insertions(+)
create mode 100644
Documentation/devicetree/bindings/serial/nxp,lpc1850-uart.txt
diff --git a/Documentation/devicetree/bindings/serial/nxp,lpc1850-uart.txt
b/Documentation/devicetree/bindings/serial/nxp,lpc1850-uart.txt
new file mode 100644
index 000000000000..04e23e63ee4f
--- /dev/null
+++ b/Documentation/devicetree/bindings/serial/nxp,lpc1850-uart.txt
@@ -0,0 +1,28 @@
+* NXP LPC1850 UART
+
+Required properties:
+- compatible : "nxp,lpc1850-uart", "ns16550a".
+- reg : offset and length of the register set for the device.
+- interrupts : should contain uart interrupt.
+- clocks : phandle to the input clocks.
+- clock-names : required elements: "uartclk", "reg".
+
+Optional properties:
+- dmas : Two or more DMA channel specifiers following the
+ convention outlined in bindings/dma/dma.txt
+- dma-names : Names for the dma channels, if present. There must
+ be at least one channel named "tx" for transmit
+ and named "rx" for receive.
+
+Since it's also possible to also use the of_serial.c driver all
+parameters from 8250.txt also apply but are optional.
+
+Example:
+uart0: serial@40081000 {
+ compatible = "nxp,lpc1850-uart", "ns16550a";
+ reg = <0x40081000 0x1000>;
+ reg-shift = <2>;
+ interrupts = <24>;
+ clocks = <&ccu2 CLK_APB0_UART0>, <&ccu1 CLK_CPU_UART0>;
+ clock-names = "uartclk", "reg";
+};
--
1.8.0
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
