When st21nfcb is disabled, the irq line may remain active while no data are available flooding the system with irrelevant i2c transaction.
Signed-off-by: Christophe Ricard <[email protected]> --- drivers/nfc/st21nfcb/i2c.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/drivers/nfc/st21nfcb/i2c.c b/drivers/nfc/st21nfcb/i2c.c index 41b5bdb..dbc0dfd 100644 --- a/drivers/nfc/st21nfcb/i2c.c +++ b/drivers/nfc/st21nfcb/i2c.c @@ -70,6 +70,9 @@ static int st21nfcb_nci_i2c_enable(void *phy_id) gpio_set_value(phy->gpio_reset, 1); usleep_range(80000, 85000); + if (phy->ndlc->powered == 0) + enable_irq(phy->i2c_dev->irq); + return 0; } @@ -77,10 +80,7 @@ static void st21nfcb_nci_i2c_disable(void *phy_id) { struct st21nfcb_i2c_phy *phy = phy_id; - /* reset chip in order to flush clf */ - gpio_set_value(phy->gpio_reset, 0); - usleep_range(10000, 15000); - gpio_set_value(phy->gpio_reset, 1); + disable_irq_nosync(phy->i2c_dev->irq); } /* -- 2.1.4 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html
