Am 08.06.2015 um 08:01 schrieb Chris Packham: Hi folks,
> Sounds like my best bet is to mark the nodes as disabled in the > dts and have my bootloader update them on the way through. In case your bootloader can take that decision (eg. if the device is present at boot time, and the bootloader has the proper probing logic or simply knows the device has to be there), that would be an pretty easy way. But let me add another usecase, which might be a bit more tricky: Let's assume we can plug in some more complex device, which consists of several (pretty standard) subdevices, behind certain bus'es (maybe it's attached via USB, and somewhere behind are some I2C bus'es with regulators, pwm-generators, etc). Let's further assume, we already got some DTS or some piece of memory with an DTB subtree for that device (eg. some simple bulk endpoint that just gives back a bunch of bytes with the DTB). Now, when the device is plugged in, I'd like to get that piece of DTB loaded and the corresponding drivers initialized. And, of course, when it's plugged-out, everything should be shut down cleanly. How could we achieve that ? --mtx -- Enrico Weigelt, metux IT consult +49-151-27565287 MELAG Medizintechnik oHG Sitz Berlin Registergericht AG Charlottenburg HRA 21333 B Wichtiger Hinweis: Diese Nachricht kann vertrauliche oder nur für einen begrenzten Personenkreis bestimmte Informationen enthalten. Sie ist ausschließlich für denjenigen bestimmt, an den sie gerichtet worden ist. Wenn Sie nicht der Adressat dieser E-Mail sind, dürfen Sie diese nicht kopieren, weiterleiten, weitergeben oder sie ganz oder teilweise in irgendeiner Weise nutzen. Sollten Sie diese E-Mail irrtümlich erhalten haben, so benachrichtigen Sie bitte den Absender, indem Sie auf diese Nachricht antworten. Bitte löschen Sie in diesem Fall diese Nachricht und alle Anhänge, ohne eine Kopie zu behalten. Important Notice: This message may contain confidential or privileged information. It is intended only for the person it was addressed to. If you are not the intended recipient of this email you may not copy, forward, disclose or otherwise use it or any part of it in any form whatsoever. If you received this email in error please notify the sender by replying and delete this message and any attachments without retaining a copy. -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html
