On Fri, Jun 19, 2015 at 1:47 PM, Stephen Boyd <[email protected]> wrote: > On 06/18, Viresh Kumar wrote: >> On 18-06-15, 07:55, Viresh Kumar wrote: >> > Why do you think so? For me the operating-points-v2-names property >> > will be present in CPU node (as there is no OPP node which can have >> > it) and so every CPU is free to choose what it wants to. >> >> So, I had something like this in mind: >> >> From: Viresh Kumar <[email protected]> >> Date: Thu, 30 Apr 2015 17:38:00 +0530 >> Subject: [PATCH] OPP: Allow multiple OPP tables to be passed via DT >> >> On some platforms (Like Qualcomm's SoCs), it is not decided until >> runtime on what OPPs to use. The OPP tables can be fixed at compile >> time, but which table to use is found out only after reading some efuses >> (sort of an prom) and knowing characteristics of the SoC. >> >> To support such platform we need to pass multiple OPP tables per device >> and hardware should be able to choose one and only one table out of >> those. >> >> Update operating-points-v2 bindings to support that. >> >> Signed-off-by: Viresh Kumar <[email protected]> > > Looks mostly ok.. > >> --- >> Documentation/devicetree/bindings/power/opp.txt | 63 >> +++++++++++++++++++++++++ >> 1 file changed, 63 insertions(+) >> >> diff --git a/Documentation/devicetree/bindings/power/opp.txt >> b/Documentation/devicetree/bindings/power/opp.txt >> index 259bf00edf7d..72ccacaac9c9 100644 >> --- a/Documentation/devicetree/bindings/power/opp.txt >> +++ b/Documentation/devicetree/bindings/power/opp.txt >> @@ -45,10 +45,21 @@ Devices supporting OPPs must set their >> "operating-points-v2" property with >> phandle to a OPP table in their DT node. The OPP core will use this phandle >> to >> find the operating points for the device. >> >> +Devices may want to choose OPP tables at runtime and so can provide a list >> of >> +phandles here. But only *one* of them should be chosen at runtime. This >> must be >> +accompanied by a corresponding "operating-points-v2-names" property, to >> uniquely >> +identify the OPP tables. >> + >> If required, this can be extended for SoC vendor specfic bindings. Such >> bindings >> should be documented as >> Documentation/devicetree/bindings/power/<vendor>-opp.txt >> and should have a compatible description like: >> "operating-points-v2-<vendor>". >> >> +Optional properties: >> +- operating-points-v2-names: Names of OPP tables (required if multiple OPP
Let's drop v2. We know it only applies to v2. >> + tables are present), to uniquely identify them. The same list must be >> present >> + for all the CPUs which are sharing clock/voltage rails and hence the OPP >> + tables. >> + >> * OPP Table Node >> >> This describes the OPPs belonging to a device. This node can have following >> @@ -63,11 +74,16 @@ This describes the OPPs belonging to a device. This node >> can have following >> reference an OPP. >> >> Optional properties: >> +- opp-name: Name of the OPP table, to uniquely identify it if more than one >> OPP >> + table is supplied in "operating-points-v2" property of device. >> + > > But isn't this being removed? If it is removed, feel free to add > > Reviewed-by: Stephen Boyd <[email protected]> Same question here. Acked-by: Rob Herring <[email protected]> Rob -- To unsubscribe from this list: send the line "unsubscribe devicetree" in
