[PATCH 2/4] ARM: dts: sun4i: Enable otg controller on the ba10-tvbox

[Hans de Goede]

The ba10-tvbox has the otg controller connected to one of the 2 usb-A
receptacles it has on the front, so enable the otg controller in host-only
mode.

Signed-off-by: Hans de Goede <hdego...@redhat.com>
---
 arch/arm/boot/dts/sun4i-a10-ba10-tvbox.dts | 15 +++++++++++++++
 1 file changed, 15 insertions(+)

diff --git a/arch/arm/boot/dts/sun4i-a10-ba10-tvbox.dts 
b/arch/arm/boot/dts/sun4i-a10-ba10-tvbox.dts
index 93d4356..f3cb297 100644
--- a/arch/arm/boot/dts/sun4i-a10-ba10-tvbox.dts
+++ b/arch/arm/boot/dts/sun4i-a10-ba10-tvbox.dts
@@ -125,12 +125,21 @@
        status = "okay";
 };
 
+&otg_sram {
+       status = "okay";
+};
+
 &pio {
        usb2_vbus_pin_a: usb2_vbus_pin@0 {
                allwinner,pins = "PH12";
        };
 };
 
+&reg_usb0_vbus {
+       regulator-boot-on;
+       status = "okay";
+};
+
 &reg_usb1_vbus {
        status = "okay";
 };
@@ -146,7 +155,13 @@
        status = "okay";
 };
 
+&usb_otg {
+       dr_mode = "host";
+       status = "okay";
+};
+
 &usbphy {
+       usb0_vbus-supply = <&reg_usb0_vbus>;
        usb1_vbus-supply = <&reg_usb1_vbus>;
        usb2_vbus-supply = <&reg_usb2_vbus>;
        status = "okay";
-- 
2.4.3

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in