On Wed, Jun 24, 2015 at 11:34:23AM +0800, Li Jun wrote:
> On Wed, Jun 24, 2015 at 11:04:43AM +0800, Peter Chen wrote:
> > On Wed, Jun 17, 2015 at 07:40:15PM +0800, Li Jun wrote:
> > > Set gadget's otg capabilities according to controller's capability and otg
> > > properties in device tree.
> > >
> > > Signed-off-by: Li Jun <[email protected]>
> > > ---
> > > drivers/usb/chipidea/core.c | 8 ++++++++
> > > drivers/usb/chipidea/udc.c | 7 ++++++-
> > > include/linux/usb/chipidea.h | 1 +
> > > 3 files changed, 15 insertions(+), 1 deletion(-)
> > >
> > > diff --git a/drivers/usb/chipidea/core.c b/drivers/usb/chipidea/core.c
> > > index 74fea4f..2abecbc 100644
> > > --- a/drivers/usb/chipidea/core.c
> > > +++ b/drivers/usb/chipidea/core.c
> > > @@ -588,6 +588,14 @@ static int ci_get_platdata(struct device *dev,
> > > of_usb_host_tpl_support(dev->of_node);
> > > }
> > >
> > > + if (platdata->dr_mode == USB_DR_MODE_OTG) {
> > > + /* We can support HNP and SRP */
> > > + platdata->ci_otg_caps.hnp_support = true;
> > > + platdata->ci_otg_caps.srp_support = true;
> > > + /* Update otg capabilities by DT properties */
> > > + of_usb_set_otg_caps(dev->of_node, &platdata->ci_otg_caps);
> > > + }
> > > +
> >
> > For current dual-role supported platforms (through ID pin), their dts has
> > nothing
> > with otg capabilities, what will happen if we set .hnp_support as true?
> >
> No impact for them, those platforms will continue work as before(i.e.
> otg descriptor with HNP&SRP enabled if CONFIG_USB_OTG is selected,
> no otg fsm if CONFIG_USB_OTG_FSM is not selected).
So if CONFIG_USB_OTG is not chosen, even platdata->ci_otg_caps.hnp_support
is true, it will be act as pure host or peripheral, right?
>
> > For non-dt platform (eg i686), how it changes otg capabilities through
> > their platform data?
> >
> Directly override platdata->ci_otg_caps in its platform driver after
> ci_hdrc_add_device().
After ci_hdrc_add_device, the device may begin to enumerate, we need to
make sure otg capabilities before the device goes to work.
Peter
>
> > Peter
> > > if (of_usb_get_maximum_speed(dev->of_node) == USB_SPEED_FULL)
> > > platdata->flags |= CI_HDRC_FORCE_FULLSPEED;
> > >
> > > diff --git a/drivers/usb/chipidea/udc.c b/drivers/usb/chipidea/udc.c
> > > index 764f668..858bd21 100644
> > > --- a/drivers/usb/chipidea/udc.c
> > > +++ b/drivers/usb/chipidea/udc.c
> > > @@ -1827,6 +1827,7 @@ static irqreturn_t udc_irq(struct ci_hdrc *ci)
> > > static int udc_start(struct ci_hdrc *ci)
> > > {
> > > struct device *dev = ci->dev;
> > > + struct usb_otg_caps *otg_caps = &ci->platdata->ci_otg_caps;
> > > int retval = 0;
> > >
> > > spin_lock_init(&ci->lock);
> > > @@ -1834,8 +1835,12 @@ static int udc_start(struct ci_hdrc *ci)
> > > ci->gadget.ops = &usb_gadget_ops;
> > > ci->gadget.speed = USB_SPEED_UNKNOWN;
> > > ci->gadget.max_speed = USB_SPEED_HIGH;
> > > - ci->gadget.is_otg = ci->is_otg ? 1 : 0;
> > > ci->gadget.name = ci->platdata->name;
> > > + ci->gadget.otg_caps = otg_caps;
> > > +
> > > + if (otg_caps->otg_rev && (otg_caps->hnp_support ||
> > > + otg_caps->srp_support || otg_caps->adp_support))
> > > + ci->gadget.is_otg = 1;
> > >
> > > INIT_LIST_HEAD(&ci->gadget.ep_list);
> > >
> > > diff --git a/include/linux/usb/chipidea.h b/include/linux/usb/chipidea.h
> > > index ab94f78..e10cefc 100644
> > > --- a/include/linux/usb/chipidea.h
> > > +++ b/include/linux/usb/chipidea.h
> > > @@ -34,6 +34,7 @@ struct ci_hdrc_platform_data {
> > > #define CI_HDRC_CONTROLLER_STOPPED_EVENT 1
> > > void (*notify_event) (struct ci_hdrc *ci, unsigned event);
> > > struct regulator *reg_vbus;
> > > + struct usb_otg_caps ci_otg_caps;
> > > bool tpl_support;
> > > };
> > >
> > > --
> > > 1.9.1
> > >
> >
> > --
> >
> > Best Regards,
> > Peter Chen
--
Best Regards,
Peter Chen
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
