> -----Original Message----- > From: [email protected] [mailto:linux-pci- > [email protected]] On Behalf Of James Morse > Sent: 01 July 2015 18:33 > To: Gabriele Paoloni; Wangzhou (B); Bjorn Helgaas; Jingoo Han; Pratyush > Anand; Arnd Bergmann; Liviu Dudau; [email protected]; [email protected]; m- > [email protected]; [email protected] > Cc: [email protected]; [email protected]; > [email protected]; Yuanzhichang; Zhudacai; zhangjukuo; > qiuzhenfa; Liguozhu (Kenneth) > Subject: Re: [PATCH v3 2/5] PCI: designware: Add ARM64 support > > Gabriele Paoloni wrote: > >> Both series are applied to v4.1, use the same .config file, and the > >> same dtb. > >> I will investigate further. > >> > >> (Re-testing v2 works, so this isn't an interim hardware failure) > > > > This is a bit weird.... > > > > Patch 2/5 is the only one that affect platforms different from > Hisilicon > > > > The only difference between V3 patch[2/5] and v2 patch[2/4] is > > Between v3:2/5 and your replacement for v2:2/4, which arrived after I > had > tested the v2 series. As the patch has been replaced with a different > one - > neither 'tested-by' is true any more.
Sorry I misread your previous email > > It looks like the BAR containing the bridge window is not being assigned, > so no devices on bus 1 are discovered. Can you confirm the dtsi you are using..."imx6qdl.dtsi" ? Thanks Gab > > I will send the full v2 and v3 dmesg output separately. > > > Thanks, > > James > > -- > To unsubscribe from this list: send the line "unsubscribe linux-pci" in > the body of a message to [email protected] > More majordomo info at http://vger.kernel.org/majordomo-info.html
