On 13 July 2015 03:20:42 BST, Matt Ranostay <[email protected]> wrote: >Document compatible string, and required DT properties for APDS9960 >chipset driver. > >Reviewed-by: Marek Vasut <[email protected]> >Signed-off-by: Matt Ranostay <[email protected]> >--- >.../devicetree/bindings/iio/light/apds9960.txt | 19 >+++++++++++++++++++ > 1 file changed, 19 insertions(+) >create mode 100644 >Documentation/devicetree/bindings/iio/light/apds9960.txt > >diff --git a/Documentation/devicetree/bindings/iio/light/apds9960.txt >b/Documentation/devicetree/bindings/iio/light/apds9960.txt >new file mode 100644 >index 0000000..7a47d28 >--- /dev/null >+++ b/Documentation/devicetree/bindings/iio/light/apds9960.txt >@@ -0,0 +1,19 @@ >+* Avago APDS9960 gesture/RGB/ALS/proximity sensor >+ >+http://www.avagotech.com/docs/AV02-4191EN >+ >+Required properties: >+ >+ - compatible: must be "avago,apds9960" >+ - reg: the I2c address of the sensor >+ - interrupt-parent: should be the phandle for the interrupt >controller >+ - interrupts: interrupt mapping for GPIO IRQ Usual trick here is to cross reference the interrupt bindings doc to allow all the complexity without duplicating docs too much. >+ >+Example: >+ >+apds9960@39 { >+ compatible = "avago,apds9960"; >+ reg = <0x39>; >+ interrupt-parent = <&gpio1>; >+ interrupts = <16 1>; >+};
-- Sent from my Android device with K-9 Mail. Please excuse my brevity. -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html
