Define the SILK board dependent part of the Ether device node. Enable DHCP and NFS root for the kernel booting.
Based on the original patch by Vladimir Barinov <[email protected]>. Signed-off-by: Sergei Shtylyov <[email protected]> --- This patch is against the 'renesas-devel-20150728-v4.2-rc4' tag of Simon Horman's 'renesas.git' repo. It depends on just posted SILK board initial DT patch in order to apply and on R8A7794 PFC DT patch posted yesterday in order to compile. arch/arm/boot/dts/r8a7794-silk.dts | 28 +++++++++++++++++++++++++++- 1 file changed, 27 insertions(+), 1 deletion(-) Index: renesas/arch/arm/boot/dts/r8a7794-silk.dts =================================================================== --- renesas.orig/arch/arm/boot/dts/r8a7794-silk.dts +++ renesas/arch/arm/boot/dts/r8a7794-silk.dts @@ -22,7 +22,7 @@ }; chosen { - bootargs = "ignore_loglevel"; + bootargs = "ignore_loglevel rw root=/dev/nfs ip=dhcp"; stdout-path = &scif2; }; @@ -41,6 +41,16 @@ renesas,groups = "scif2_data"; renesas,function = "scif2"; }; + + ether_pins: ether { + renesas,groups = "eth_link", "eth_mdio", "eth_rmii"; + renesas,function = "eth"; + }; + + phy1_pins: phy1 { + renesas,groups = "intc_irq8"; + renesas,function = "intc"; + }; }; &scif2 { @@ -49,3 +59,19 @@ status = "okay"; }; + +ðer { + pinctrl-0 = <ðer_pins &phy1_pins>; + pinctrl-names = "default"; + + phy-handle = <&phy1>; + renesas,ether-link-active-low; + status = "okay"; + + phy1: ethernet-phy@1 { + reg = <1>; + interrupt-parent = <&irqc0>; + interrupts = <8 IRQ_TYPE_LEVEL_LOW>; + micrel,led-mode = <1>; + }; +}; -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html
