Hi!
I'm in the middle of getting the IEEE1588/PTP features of the GMAC up and
running. The problem I have is with the current binding however.
The documentation says:
Example:
gmac0: ethernet@ff700000 {
compatible = "altr,socfpga-stmmac", "snps,dwmac-3.70a", "snps,dwmac";
altr,sysmgr-syscon = <&sysmgr 0x60 0>;
status = "disabled";
reg = <0xff700000 0x2000>;
interrupts = <0 115 4>;
interrupt-names = "macirq";
mac-address = [00 00 00 00 00 00];/* Filled in by U-Boot */
clocks = <&emac_0_clk>;
clock-names = "stmmaceth";
};
The problem is with the "altr,sysmgr-syscon" property. It was invented,
because the Arria10 and the Arria5/CycloneV have different register
offsets and shifts. This information is however not enough to describe all
properties of the hardware, but more of a crutch IMHO.
The shifts are for the PHYSEL bits. Of course now I need some
different shifts AND I need to access an additional register with different
shifts on Arria10 and CycloneV in the sysmgr.
So, the standard way of handling this is with a new compatible for each
type and getting rid of the register offset and shift in the property,
I guess. And test the DT and print a deprecation warning if the property
is still there.
Do you see any other/better way of fixing this?
As a side note: Is it reasonable to use the "clk_ptp_ref" property of the
stmmac to decide if the PTP features should be enabled or not?
As the hardware needs to be configured to use this clock, I think the
presence of this property is a good enough indicator.
Regards,
Steffen
--
Pengutronix e.K. | |
Industrial Linux Solutions | http://www.pengutronix.de/ |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
