Hi Maxime,
On 14-08-15 16:44, Hans de Goede wrote:
Enable i2c bus 1 and 2 on the Wits A20 Pro DKT, these are used for
the touchscreen resp. the accelerometer.
Signed-off-by: Hans de Goede <[email protected]>
Erm, please skip this one it depends on another patch
(which adds the sun7i-a20-wits-pro-a20-dkt.dts), which
I've not submitted yet as it depends on the axp
usb-power-supply driver.
So as said please skip this one, I've squashed it into
the patch adding the dts file, which I will submit
later.
Regards,
Hans
---
arch/arm/boot/dts/sun7i-a20-wits-pro-a20-dkt.dts | 12 ++++++++++++
1 file changed, 12 insertions(+)
diff --git a/arch/arm/boot/dts/sun7i-a20-wits-pro-a20-dkt.dts
b/arch/arm/boot/dts/sun7i-a20-wits-pro-a20-dkt.dts
index da47608..85b500d 100644
--- a/arch/arm/boot/dts/sun7i-a20-wits-pro-a20-dkt.dts
+++ b/arch/arm/boot/dts/sun7i-a20-wits-pro-a20-dkt.dts
@@ -92,6 +92,18 @@
};
};
+&i2c1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c1_pins_a>;
+ status = "okay";
+};
+
+&i2c2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c2_pins_a>;
+ status = "okay";
+};
+
#include "axp209.dtsi"
&mmc0 {
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
