On Mon, Aug 17, 2015 at 10:25:38AM +0530, Keerthy wrote:
> Configure the clock source to either internal clock
> or external clock based on the availability of the clocks.
> External clock is preferred as it can be ticking during suspend.
>
> Signed-off-by: Keerthy <[email protected]>
> ---
>
> Changes in V2:
>
> * Changed clk_prepare calls to clk_prepare_enable.
> * Changed clk_unprepare calls to clk_disable_unprepare.
> * Added clk pointers for external and internal clock to omap_rtc structure.
>
> drivers/rtc/rtc-omap.c | 40 ++++++++++++++++++++++++++++++++++++++++
> 1 file changed, 40 insertions(+)
>
> diff --git a/drivers/rtc/rtc-omap.c b/drivers/rtc/rtc-omap.c
> index 8b6355f..46b3944 100644
> --- a/drivers/rtc/rtc-omap.c
> +++ b/drivers/rtc/rtc-omap.c
> @@ -25,6 +25,7 @@
> #include <linux/of_device.h>
> #include <linux/pm_runtime.h>
> #include <linux/io.h>
> +#include <linux/clk.h>
>
> /*
> * The OMAP RTC is a year/month/day/hours/minutes/seconds BCD clock
> @@ -107,6 +108,7 @@
>
> /* OMAP_RTC_OSC_REG bit fields: */
> #define OMAP_RTC_OSC_32KCLK_EN BIT(6)
> +#define OMAP_RTC_OSC_SEL_32KCLK_SRC BIT(3)
>
> /* OMAP_RTC_IRQWAKEEN bit fields: */
> #define OMAP_RTC_IRQWAKEEN_ALARM_WAKEEN BIT(1)
> @@ -132,10 +134,13 @@ struct omap_rtc_device_type {
> struct omap_rtc {
> struct rtc_device *rtc;
> void __iomem *base;
> + struct clk *ext_clk;
> + struct clk *int_clk;
As was already suggested, you could just use one clock here for now.
> int irq_alarm;
> int irq_timer;
> u8 interrupts_reg;
> bool is_pmic_controller;
> + bool has_ext_clk;
> const struct omap_rtc_device_type *type;
> };
>
> @@ -553,6 +558,17 @@ static int omap_rtc_probe(struct platform_device *pdev)
> if (rtc->irq_alarm <= 0)
> return -ENOENT;
>
> + rtc->ext_clk = devm_clk_get(&pdev->dev, "ext-clk");
> + if (!IS_ERR(rtc->ext_clk)) {
> + rtc->has_ext_clk = true;
> + clk_prepare_enable(rtc->ext_clk);
> + } else {
> + rtc->int_clk = devm_clk_get(&pdev->dev, "int-clk");
> +
> + if (!IS_ERR(rtc->int_clk))
> + clk_prepare_enable(rtc->int_clk);
> + }
> +
Which would allow some simplification here.
But shouldn't enabling the internal clock go in its own patch before you
add support for the external clock?
> res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
> rtc->base = devm_ioremap_resource(&pdev->dev, res);
> if (IS_ERR(rtc->base))
> @@ -627,6 +643,16 @@ static int omap_rtc_probe(struct platform_device *pdev)
> if (reg != new_ctrl)
> rtc_write(rtc, OMAP_RTC_CTRL_REG, new_ctrl);
>
> + /*
> + * If we have the external clock then switch to it so we can keep
> + * ticking acorss suspend.
You forgot to fix the "acorss" typo.
> + */
> + if (rtc->has_ext_clk) {
> + reg = rtc_read(rtc, OMAP_RTC_OSC_REG);
> + rtc_write(rtc, OMAP_RTC_OSC_REG, reg |
> + OMAP_RTC_OSC_SEL_32KCLK_SRC);
Odd line break, break after the final comma instead?
> + }
> +
> rtc->type->lock(rtc);
>
> device_init_wakeup(&pdev->dev, true);
> @@ -672,6 +698,7 @@ err:
> static int __exit omap_rtc_remove(struct platform_device *pdev)
> {
> struct omap_rtc *rtc = platform_get_drvdata(pdev);
> + u8 reg;
>
> if (pm_power_off == omap_rtc_power_off &&
> omap_rtc_power_off_rtc == rtc) {
> @@ -681,10 +708,23 @@ static int __exit omap_rtc_remove(struct
> platform_device *pdev)
>
> device_init_wakeup(&pdev->dev, 0);
>
> + if (!IS_ERR(rtc->ext_clk)) {
> + clk_disable_unprepare(rtc->ext_clk);
> + } else {
> + if (!IS_ERR(rtc->int_clk))
> + clk_disable_unprepare(rtc->int_clk);
> + }
> +
This could also be simplified with a single clock entry in rtc.
> rtc->type->unlock(rtc);
> /* leave rtc running, but disable irqs */
> rtc_write(rtc, OMAP_RTC_INTERRUPTS_REG, 0);
>
> + if (rtc->has_ext_clk) {
> + reg = rtc_read(rtc, OMAP_RTC_OSC_REG);
> + reg &= ~OMAP_RTC_OSC_SEL_32KCLK_SRC;
> + rtc_write(rtc, OMAP_RTC_OSC_REG, reg);
> + }
> +
> rtc->type->lock(rtc);
>
> /* Disable the clock/module */
Johan
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
