Define the SILK board dependent part of the VIN0 device node. Add the device node for Analog Devices ADV7180 video decoder to I2C1 bus. Add the necessary subnodes to interconnect VIN0 and ADV7180 devices.
Based on the Henninger VIN0/ADV8170 device tree patch by myself. Signed-off-by: Sergei Shtylyov <[email protected]> --- arch/arm/boot/dts/r8a7794-silk.dts | 35 +++++++++++++++++++++++++++++++++++ 1 file changed, 35 insertions(+) Index: renesas/arch/arm/boot/dts/r8a7794-silk.dts =================================================================== --- renesas.orig/arch/arm/boot/dts/r8a7794-silk.dts +++ renesas/arch/arm/boot/dts/r8a7794-silk.dts @@ -104,6 +104,11 @@ renesas,groups = "qspi_ctrl", "qspi_data4"; renesas,function = "qspi"; }; + + vin0_pins: vin0 { + renesas,groups = "vin0_data8", "vin0_clk"; + renesas,function = "vin0"; + }; }; &scif2 { @@ -135,6 +140,19 @@ status = "okay"; clock-frequency = <400000>; + + composite-in@20 { + compatible = "adi,adv7180"; + reg = <0x20>; + remote = <&vin0>; + + port { + adv7180: endpoint { + bus-width = <8>; + remote-endpoint = <&vin0ep>; + }; + }; + }; }; &mmcif0 { @@ -193,3 +211,20 @@ }; }; }; + +/* composite video input */ +&vin0 { + status = "okay"; + pinctrl-0 = <&vin0_pins>; + pinctrl-names = "default"; + + port { + #address-cells = <1>; + #size-cells = <0>; + + vin0ep: endpoint { + remote-endpoint = <&adv7180>; + bus-width = <8>; + }; + }; +}; -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html
