Hi Marek,
Having some compile issues...see below
On 08/21/2015 04:20 AM, Marek Vasut wrote:
From: Graham Moore <[email protected]>
Add support for the Cadence QSPI controller. This controller is
present in the Altera SoCFPGA SoCs and this driver has been tested
on the Cyclone V SoC.
Signed-off-by: Graham Moore <[email protected]>
Signed-off-by: Marek Vasut <[email protected]>
[...]
+static int cqspi_set_protocol(struct spi_nor *nor, enum spi_protocol proto)
+{
+ struct cqspi_flash_pdata *f_pdata = nor->priv;
+
+ switch (proto) {
+ case SPI_PROTO_1_1_1:
+ case SPI_PROTO_1_1_2:
+ case SPI_PROTO_1_1_4:
+ case SPI_PROTO_1_2_2:
+ case SPI_PROTO_1_4_4:
+ f_pdata->inst_width = CQSPI_INST_TYPE_SINGLE;
+ break;
+ case SPI_PROTO_2_2_2:
+ f_pdata->inst_width = CQSPI_INST_TYPE_DUAL;
+ break;
+ case SPI_PROTO_4_4_4:
+ f_pdata->inst_width = CQSPI_INST_TYPE_QUAD;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ switch (proto) {
+ case SPI_PROTO_1_1_1:
+ case SPI_PROTO_1_1_2:
+ case SPI_PROTO_1_1_4:
+ f_pdata->addr_width = CQSPI_INST_TYPE_SINGLE;
+ break;
+ case SPI_PROTO_1_2_2:
+ case SPI_PROTO_2_2_2:
+ f_pdata->addr_width = CQSPI_INST_TYPE_DUAL;
+ break;
+ case SPI_PROTO_1_4_4:
+ case SPI_PROTO_4_4_4:
+ f_pdata->addr_width = CQSPI_INST_TYPE_QUAD;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
I think you have some other patches in your tree, the above doesn't
compile on l2-mtd/master:
~/l2-mtd/drivers/mtd/spi-nor/cadence-quadspi.c:701:57: warning: ‘enum
spi_protocol’ declared inside parameter list [enabled by default]
~/l2-mtd/drivers/mtd/spi-nor/cadence-quadspi.c:701:57: warning: its
scope is only this definition or declaration, which is probably not what
you want [enabled by default]
~/l2-mtd/drivers/mtd/spi-nor/cadence-quadspi.c:701:70: error: parameter
2 (‘proto’) has incomplete type
~/l2-mtd/drivers/mtd/spi-nor/cadence-quadspi.c:701:12: error: function
declaration isn’t a prototype [-Werror=strict-prototypes]
~/l2-mtd/drivers/mtd/spi-nor/cadence-quadspi.c: In function
‘cqspi_set_protocol’:
~/l2-mtd/drivers/mtd/spi-nor/cadence-quadspi.c:706:7: error:
‘SPI_PROTO_1_1_1’ undeclared (first use in this function)
~/l2-mtd/drivers/mtd/spi-nor/cadence-quadspi.c:706:7: note: each
undeclared identifier is reported only once for each function it appears in
~/l2-mtd/drivers/mtd/spi-nor/cadence-quadspi.c:707:7: error:
‘SPI_PROTO_1_1_2’ undeclared (first use in this function)
~/l2-mtd/drivers/mtd/spi-nor/cadence-quadspi.c:708:7: error:
‘SPI_PROTO_1_1_4’ undeclared (first use in this function)
~/l2-mtd/drivers/mtd/spi-nor/cadence-quadspi.c:709:7: error:
‘SPI_PROTO_1_2_2’ undeclared (first use in this function)
~/l2-mtd/drivers/mtd/spi-nor/cadence-quadspi.c:710:7: error:
‘SPI_PROTO_1_4_4’ undeclared (first use in this function)
~/l2-mtd/drivers/mtd/spi-nor/cadence-quadspi.c:713:7: error:
‘SPI_PROTO_2_2_2’ undeclared (first use in this function)
~/l2-mtd/drivers/mtd/spi-nor/cadence-quadspi.c:716:7: error:
‘SPI_PROTO_4_4_4’ undeclared (first use in this function)
~/l2-mtd/drivers/mtd/spi-nor/cadence-quadspi.c: In function
‘cqspi_setup_flash’:
~/l2-mtd/drivers/mtd/spi-nor/cadence-quadspi.c:1087:6: error: ‘struct
spi_nor’ has no member named ‘dn’
~/l2-mtd/drivers/mtd/spi-nor/cadence-quadspi.c:1096:6: error: ‘struct
spi_nor’ has no member named ‘set_protocol’
[...]
Regards,
Graham
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
