Am Dienstag, den 08.09.2015, 16:34 +0200 schrieb Gary Bisson:
> This patch adds the different touchscreens that can be connected using
> the displays available for this board.
> http://boundarydevices.com/product-category/displays/
>
> Signed-off-by: Gary Bisson <[email protected]>
> ---
> arch/arm/boot/dts/imx6qdl-nitrogen6x.dtsi | 16 ++++++++++++++++
> 1 file changed, 16 insertions(+)
>
> diff --git a/arch/arm/boot/dts/imx6qdl-nitrogen6x.dtsi
> b/arch/arm/boot/dts/imx6qdl-nitrogen6x.dtsi
> index ad16dce..24b667d 100644
> --- a/arch/arm/boot/dts/imx6qdl-nitrogen6x.dtsi
> +++ b/arch/arm/boot/dts/imx6qdl-nitrogen6x.dtsi
> @@ -284,6 +284,22 @@
> pinctrl-names = "default";
> pinctrl-0 = <&pinctrl_i2c3>;
> status = "okay";
> +
> + egalax_ts@04 {
I'd prefer to use generic names for the nodes, such as "touchscreen@04",
and "touchscreen@38" below.
> + compatible = "eeti,egalax_ts";
> + reg = <0x04>;
> + interrupt-parent = <&gpio1>;
> + interrupts = <9 IRQ_TYPE_EDGE_FALLING>;
> + wakeup-gpios = <&gpio1 9 GPIO_ACTIVE_LOW>;
> + };
> +
> + ft5x06_ts@38 {
> + compatible = "edt,edt-ft5x06";
> + reg = <0x38>;
> + interrupt-parent = <&gpio1>;
> + interrupts = <9 IRQ_TYPE_EDGE_FALLING>;
> + wakeup-gpios = <&gpio1 9 GPIO_ACTIVE_LOW>;
This should be wake-gpios and GPIO_ACTIVE_HIGH according to the other
users.
> + };
> };
>
> &iomuxc {
With those changes,
Acked-by: Philipp Zabel <[email protected]>
regards
Philipp
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
