The System Control Processor (SCP) provides access to SoC sensors via the System Control and Power Interface (SCPI) Message Protocol. Add bindings to allow probing of these sensors. Also support referencing of the sensors for setting up thermal zones via the thermal DT bindings.
Signed-off-by: Punit Agrawal <[email protected]> Cc: Rob Herring <[email protected]> Cc: Mark Rutland <[email protected]> Cc: Sudeep Holla <[email protected]> --- Documentation/devicetree/bindings/arm/arm,scpi.txt | 15 +++++++++++++++ 1 file changed, 15 insertions(+) diff --git a/Documentation/devicetree/bindings/arm/arm,scpi.txt b/Documentation/devicetree/bindings/arm/arm,scpi.txt index f002460..af66f7f 100644 --- a/Documentation/devicetree/bindings/arm/arm,scpi.txt +++ b/Documentation/devicetree/bindings/arm/arm,scpi.txt @@ -72,8 +72,18 @@ Required sub-node properties: - compatible : should be "arm,juno-scp-shmem" for Non-secure SRAM based shared memory on Juno platforms +Sensor bindings for the sensors based on SCPI Message Protocol +-------------------------------------------------------------- +SCPI provides an API to access the various sensors on the SoC. + +Required properties: +- compatible : should be "arm,scpi-sensors". +- #thermal-sensor-cells: should be set to 1. This property follows the + thermal device tree bindings[2]. + [0] http://infocenter.arm.com/help/topic/com.arm.doc.dui0922b/index.html [1] Documentation/devicetree/bindings/clock/clock-bindings.txt +[2] Documentation/devicetree/bindings/thermal/thermal.txt Example: @@ -122,6 +132,11 @@ scpi_protocol: scpi@2e000000 { clock-output-names = "pxlclk0", "pxlclk1"; }; }; + + scpi_sensors0: sensors { + compatible = "arm,scpi-sensors"; + #thermal-sensor-cells = <1>; + }; }; cpu@0 { -- 2.5.0 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html
