On Wed, Sep 16, 2015 at 03:06:04PM +0900, Krzysztof Kozlowski wrote:
> On 16.09.2015 02:58, Andreas Dannenberg wrote:
> > A new optional device property called "ti,in-dpm-voltage" is introduced
> > to allow configuring the input voltage threshold for the devices'
> > dynamic power path management (DPM) feature. In short, it can be used to
> > prevent the input voltage from dropping below a certain value as current
> > is drawn to charge the battery or supply the system.
> >
> > Signed-off-by: Andreas Dannenberg <[email protected]>
> > ---
> > drivers/power/bq24257_charger.c | 44
> > +++++++++++++++++++++++++++++++++++++++++
> > 1 file changed, 44 insertions(+)
> >
> > diff --git a/drivers/power/bq24257_charger.c
> > b/drivers/power/bq24257_charger.c
> > index 47af858..84a8945 100644
> > --- a/drivers/power/bq24257_charger.c
> > +++ b/drivers/power/bq24257_charger.c
> > @@ -76,6 +76,7 @@ struct bq24257_init_data {
> > u8 iterm; /* termination current */
> > u8 in_ilimit; /* input current limit */
> > u8 vovp; /* over voltage protection voltage */
> > + u8 vindpm; /* VDMP input threshold voltage */
> > };
> >
> > struct bq24257_state {
> > @@ -206,6 +207,13 @@ static const u32 bq24257_vovp_map[] = {
> >
> > #define BQ24257_VOVP_MAP_SIZE ARRAY_SIZE(bq24257_vovp_map)
> >
> > +static const u32 bq24257_vindpm_map[] = {
> > + 4200000, 4280000, 4360000, 4440000, 4520000, 4600000, 4680000,
> > + 4760000
> > +};
> > +
> > +#define BQ24257_VINDPM_MAP_SIZE ARRAY_SIZE(bq24257_vindpm_map)
> > +
> > static int bq24257_field_read(struct bq24257_device *bq,
> > enum bq24257_fields field_id)
> > {
> > @@ -432,6 +440,17 @@ enum bq24257_vovp {
> > VOVP_10500
> > };
> >
> > +enum bq24257_vindpm {
> > + VINDPM_4200,
> > + VINDPM_4280,
> > + VINDPM_4360,
> > + VINDPM_4440,
> > + VINDPM_4520,
> > + VINDPM_4600,
> > + VINDPM_4680,
> > + VINDPM_4760
> > +};
>
> Same as patch 6/10... but now see the use case - to choose default value
> not by index of array but from this enum.
>
> I see the idea behind so skip that comment from 6/10.
OK.
> > +
> > enum bq24257_port_type {
> > PORT_TYPE_DCP, /* Dedicated Charging Port */
> > PORT_TYPE_CDP, /* Charging Downstream Port */
> > @@ -615,6 +634,7 @@ static int bq24257_hw_init(struct bq24257_device *bq)
> > {F_VBAT, bq->init_data.vbat},
> > {F_ITERM, bq->init_data.iterm},
> > {F_VOVP, bq->init_data.vovp},
> > + {F_VINDPM, bq->init_data.vindpm},
> > };
> >
> > /*
> > @@ -648,6 +668,7 @@ static int bq24257_hw_init(struct bq24257_device *bq)
> > /* program fixed input current limit */
> > ret = bq24257_field_write(bq, F_IILIMIT,
> > bq->init_data.in_ilimit);
> > +
>
> Not part of this patch. It confuses the reviewer of patch. If you need
> cleanups, make them separate.
Artifact. This should not be there.
> > if (ret < 0)
> > return ret;
> > } else if (!state.power_good)
> > @@ -695,10 +716,23 @@ static ssize_t bq24257_show_ovp_voltage(struct device
> > *dev,
> > bq24257_vovp_map[bq->init_data.vovp]);
> > }
> >
> > +static ssize_t bq24257_show_in_dpm_voltage(struct device *dev,
> > + struct device_attribute *attr,
> > + char *buf)
> > +{
> > + struct power_supply *psy = dev_get_drvdata(dev);
> > + struct bq24257_device *bq = power_supply_get_drvdata(psy);
> > +
> > + return scnprintf(buf, PAGE_SIZE, "%d\n",
> > + bq24257_vindpm_map[bq->init_data.vindpm]);
>
> Same as patch 6/10.
OK.
Regards,
--
Andreas Dannenberg
Texas Instruments Inc
>
> Best regards,
> Krzysztof
>
> > +}
> > +
> > static DEVICE_ATTR(ovp_voltage, S_IRUGO, bq24257_show_ovp_voltage, NULL);
> > +static DEVICE_ATTR(in_dpm_voltage, S_IRUGO, bq24257_show_in_dpm_voltage,
> > NULL);
> >
> > static struct attribute *bq24257_charger_attr[] = {
> > &dev_attr_ovp_voltage.attr,
> > + &dev_attr_in_dpm_voltage.attr,
> > NULL,
> > };
> >
> > @@ -801,6 +835,16 @@ static int bq24257_fw_probe(struct bq24257_device *bq)
> > bq24257_vovp_map,
> > BQ24257_VOVP_MAP_SIZE);
> >
> > + ret = device_property_read_u32(bq->dev, "ti,in-dpm-voltage",
> > + &property);
> > + if (ret < 0)
> > + bq->init_data.vindpm = VINDPM_4360;
> > + else
> > + bq->init_data.vindpm =
> > + bq24257_find_idx(property,
> > + bq24257_vindpm_map,
> > + BQ24257_VINDPM_MAP_SIZE);
> > +
> > return 0;
> > }
> >
> >
>
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
