On Tue, Sep 8, 2015 at 6:20 AM, Punit Agrawal <[email protected]> wrote:
> The device trees in the kernel as well as the binding description in
> Documentation/devicetree/bindings/cpufreq/cpufreq-dt.txt use the
> cooling-{min,max}-level property.
>
> Fix the inconsistency with the binding description in
> Documentation/devicetree/bindings/thermal/thermal.txt by changing
> cooling-*-state properties to cooling-*-level.
>
> Signed-off-by: Punit Agrawal <[email protected]>
> Cc: Eduardo Valentin <[email protected]>
> Cc: Rob Herring <[email protected]>
> Cc: Mark Rutland <[email protected]>
> Cc: Ian Campbell <[email protected]>
> Cc: Kumar Gala <[email protected]>
Both patches applied. Thanks.
Rob
> ---
> Documentation/devicetree/bindings/thermal/thermal.txt | 14 +++++++-------
> 1 file changed, 7 insertions(+), 7 deletions(-)
>
> diff --git a/Documentation/devicetree/bindings/thermal/thermal.txt
> b/Documentation/devicetree/bindings/thermal/thermal.txt
> index 8a49362..8320186 100644
> --- a/Documentation/devicetree/bindings/thermal/thermal.txt
> +++ b/Documentation/devicetree/bindings/thermal/thermal.txt
> @@ -55,16 +55,16 @@ of heat dissipation). For example a fan's cooling states
> correspond to
> the different fan speeds possible. Cooling states are referred to by
> single unsigned integers, where larger numbers mean greater heat
> dissipation. The precise set of cooling states associated with a device
> -(as referred to be the cooling-min-state and cooling-max-state
> +(as referred to by the cooling-min-level and cooling-max-level
> properties) should be defined in a particular device's binding.
> For more examples of cooling devices, refer to the example sections below.
>
> Required properties:
> -- cooling-min-state: An integer indicating the smallest
> +- cooling-min-level: An integer indicating the smallest
> Type: unsigned cooling state accepted. Typically 0.
> Size: one cell
>
> -- cooling-max-state: An integer indicating the largest
> +- cooling-max-level: An integer indicating the largest
> Type: unsigned cooling state accepted.
> Size: one cell
>
> @@ -225,8 +225,8 @@ cpus {
> 396000 950000
> 198000 850000
> >;
> - cooling-min-state = <0>;
> - cooling-max-state = <3>;
> + cooling-min-level = <0>;
> + cooling-max-level = <3>;
> #cooling-cells = <2>; /* min followed by max */
> };
> ...
> @@ -240,8 +240,8 @@ cpus {
> */
> fan0: fan@0x48 {
> ...
> - cooling-min-state = <0>;
> - cooling-max-state = <9>;
> + cooling-min-level = <0>;
> + cooling-max-level = <9>;
> #cooling-cells = <2>; /* min followed by max */
> };
> };
> --
> 2.5.0
>
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
