Currently memory node parsing uses root "#size-cells", "#address-cells"
This doesn't work correctly when memory address/size is different or
greater than root's.

e.g. ARC 32-bit systems implementing physical adressing extension and
say 4GB of memory. All peripherals mappings stay within the 4GB (so root
address/size cells remain 1 each), only the memory node address/size
cells needs to specify greater than 32-bits as below

        memory {
                device_type = "memory";
                reg = <0x0 0x80000000 0x1 0x00000000>;  /* 4 GB */
                #address-cells = <2>;
                #size-cells = <2>;
        };

This patch lets me boot a ARC system with PAE40 + 4GB of memory specified
as above and fails to boot otherwise as memory parsing doesn't populate
right base, size.

Cc: Grant Likely <[email protected]>
Cc: Rob Herring <[email protected]>
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Signed-off-by: Vineet Gupta <[email protected]>
---
 drivers/of/fdt.c | 21 ++++++++++++++++-----
 1 file changed, 16 insertions(+), 5 deletions(-)

diff --git a/drivers/of/fdt.c b/drivers/of/fdt.c
index 07496560e5b9..3af808f45965 100644
--- a/drivers/of/fdt.c
+++ b/drivers/of/fdt.c
@@ -888,8 +888,8 @@ int __init early_init_dt_scan_memory(unsigned long node, 
const char *uname,
                                     int depth, void *data)
 {
        const char *type = of_get_flat_dt_prop(node, "device_type", NULL);
-       const __be32 *reg, *endp;
-       int l;
+       const __be32 *reg, *endp, *prop;
+       int l, dt_mem_addr_cells, dt_mem_size_cells;
 
        /* We are scanning "memory" nodes only */
        if (type == NULL) {
@@ -912,11 +912,22 @@ int __init early_init_dt_scan_memory(unsigned long node, 
const char *uname,
 
        pr_debug("memory scan node %s, reg size %d,\n", uname, l);
 
-       while ((endp - reg) >= (dt_root_addr_cells + dt_root_size_cells)) {
+
+       dt_mem_size_cells = dt_root_size_cells,;
+       prop = of_get_flat_dt_prop(node, "#size-cells", NULL);
+       if (prop)
+               dt_mem_size_cells = be32_to_cpup(prop);
+
+       dt_mem_addr_cells = dt_root_addr_cells;
+       prop = of_get_flat_dt_prop(node, "#address-cells", NULL);
+       if (prop)
+               dt_mem_addr_cells = be32_to_cpup(prop);
+
+       while ((endp - reg) >= (dt_mem_addr_cells + dt_mem_size_cells)) {
                u64 base, size;
 
-               base = dt_mem_next_cell(dt_root_addr_cells, &reg);
-               size = dt_mem_next_cell(dt_root_size_cells, &reg);
+               base = dt_mem_next_cell(dt_mem_addr_cells, &reg);
+               size = dt_mem_next_cell(dt_mem_size_cells, &reg);
 
                if (size == 0)
                        continue;
-- 
1.9.1

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to [email protected]
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Reply via email to