From: Magnus Damm <[email protected]> Add part numbers for APE6 and current set of R-Car Gen2 SoCs to the IPMMU DT binding documentation. The example is also updated to show how the generic compatible string may be used as fallback.
Signed-off-by: Magnus Damm <[email protected]> --- Documentation/devicetree/bindings/iommu/renesas,ipmmu-vmsa.txt | 12 ++++++++-- 1 file changed, 10 insertions(+), 2 deletions(-) --- 0001/Documentation/devicetree/bindings/iommu/renesas,ipmmu-vmsa.txt +++ work/Documentation/devicetree/bindings/iommu/renesas,ipmmu-vmsa.txt 2015-10-18 15:53:08.850513000 +0900 @@ -7,7 +7,15 @@ connected to the IPMMU through a port ca Required Properties: - - compatible: Must contain "renesas,ipmmu-vmsa". + - compatible: Must contain one of the following: + + - "renesas,ipmmu-r8a73a4" for the R8A73A4 (R-Mobile APE6) IPMMU. + - "renesas,ipmmu-r8a7790" for the R8A7790 (R-Car H2) IPMMU. + - "renesas,ipmmu-r8a7791" for the R8A7791 (R-Car M2-W) IPMMU. + - "renesas,ipmmu-r8a7793" for the R8A7793 (R-Car M2-N) IPMMU. + - "renesas,ipmmu-r8a7794" for the R8A7794 (R-Car E2) IPMMU. + - "renesas,ipmmu-vmsa" for generic R-Car Gen2 VMSA-compatible IPMMU. + - reg: Base address and size of the IPMMU registers. - interrupts: Specifiers for the MMU fault interrupts. For instances that support secure mode two interrupts must be specified, for non-secure and @@ -27,7 +35,7 @@ node with the following property: Example: R8A7791 IPMMU-MX and VSP1-D0 bus master ipmmu_mx: mmu@fe951000 { - compatible = "renasas,ipmmu-vmsa"; + compatible = "renasas,ipmmu-r8a7791", "renasas,ipmmu-vmsa"; reg = <0 0xfe951000 0 0x1000>; interrupts = <0 222 IRQ_TYPE_LEVEL_HIGH>, <0 221 IRQ_TYPE_LEVEL_HIGH>; -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html
