Add offsets for 40nm BMIPS based set-top box platforms.
Signed-off-by: Jaedon Shin <[email protected]>
---
drivers/phy/phy-brcmstb-sata.c | 21 ++++++++++++++-------
1 file changed, 14 insertions(+), 7 deletions(-)
diff --git a/drivers/phy/phy-brcmstb-sata.c b/drivers/phy/phy-brcmstb-sata.c
index 41c7535d706b..1cc80743b1b6 100644
--- a/drivers/phy/phy-brcmstb-sata.c
+++ b/drivers/phy/phy-brcmstb-sata.c
@@ -30,7 +30,8 @@
#define MAX_PORTS 2
/* Register offset between PHYs in PCB space */
-#define SATA_MDIO_REG_SPACE_SIZE 0x1000
+#define SATA_MDIO_REG_28NM_SPACE_SIZE 0x1000
+#define SATA_MDIO_REG_40NM_SPACE_SIZE 0x10
struct brcm_sata_port {
int portnum;
@@ -47,7 +48,7 @@ struct brcm_sata_phy {
struct brcm_sata_port phys[MAX_PORTS];
};
-enum sata_mdio_phy_regs_28nm {
+enum sata_mdio_phy_regs {
PLL_REG_BANK_0 = 0x50,
PLL_REG_BANK_0_PLLCONTROL_0 = 0x81,
@@ -85,7 +86,7 @@ static void brcm_sata_mdio_wr(void __iomem *addr, u32 bank,
u32 ofs,
#define FMAX_VAL_DEFAULT 0x3df
#define FMAX_VAL_SSC 0x83
-static void brcm_sata_cfg_ssc_28nm(struct brcm_sata_port *port)
+static void brcm_sata_cfg_ssc(struct brcm_sata_port *port)
{
void __iomem *base = brcm_sata_phy_base(port);
struct brcm_sata_phy *priv = port->phy_priv;
@@ -116,19 +117,25 @@ static int brcm_sata_phy_init(struct phy *phy)
{
struct brcm_sata_port *port = phy_get_drvdata(phy);
- brcm_sata_cfg_ssc_28nm(port);
+ brcm_sata_cfg_ssc(port);
return 0;
}
-static const struct phy_ops phy_ops_28nm = {
+static const struct phy_ops phy_ops = {
.init = brcm_sata_phy_init,
.owner = THIS_MODULE,
};
static const struct of_device_id brcm_sata_phy_of_match[] = {
{ .compatible = "brcm,bcm7445-sata-phy",
- .data = (void *)SATA_MDIO_REG_SPACE_SIZE },
+ .data = (void *)SATA_MDIO_REG_28NM_SPACE_SIZE },
+ { .compatible = "brcm,bcm7346-sata-phy",
+ .data = (void *)SATA_MDIO_REG_40NM_SPACE_SIZE },
+ { .compatible = "brcm,bcm7360-sata-phy",
+ .data = (void *)SATA_MDIO_REG_40NM_SPACE_SIZE },
+ { .compatible = "brcm,bcm7362-sata-phy",
+ .data = (void *)SATA_MDIO_REG_40NM_SPACE_SIZE },
{},
};
MODULE_DEVICE_TABLE(of, brcm_sata_phy_of_match);
@@ -185,7 +192,7 @@ static int brcm_sata_phy_probe(struct platform_device *pdev)
port = &priv->phys[id];
port->portnum = id;
port->phy_priv = priv;
- port->phy = devm_phy_create(dev, child, &phy_ops_28nm);
+ port->phy = devm_phy_create(dev, child, &phy_ops);
port->ssc_en = of_property_read_bool(child, "brcm,enable-ssc");
if (IS_ERR(port->phy)) {
dev_err(dev, "failed to create PHY\n");
--
2.6.2
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
