Add offsets for 40nm BMIPS based set-top box platforms.
Signed-off-by: Jaedon Shin <[email protected]>
---
drivers/ata/ahci_brcmstb.c | 11 +++++++++--
1 file changed, 9 insertions(+), 2 deletions(-)
diff --git a/drivers/ata/ahci_brcmstb.c b/drivers/ata/ahci_brcmstb.c
index 8cf6f7d4798f..59eb526cf4f6 100644
--- a/drivers/ata/ahci_brcmstb.c
+++ b/drivers/ata/ahci_brcmstb.c
@@ -50,7 +50,8 @@
#define SATA_TOP_CTRL_2_SW_RST_RX BIT(2)
#define SATA_TOP_CTRL_2_SW_RST_TX BIT(3)
#define SATA_TOP_CTRL_2_PHY_GLOBAL_RESET BIT(14)
- #define SATA_TOP_CTRL_PHY_OFFS 0x8
+ #define SATA_TOP_CTRL_28NM_PHY_OFFS 0x8
+ #define SATA_TOP_CTRL_40NM_PHY_OFFS 0x4
#define SATA_TOP_MAX_PHYS 2
#define SATA_TOP_CTRL_SATA_TP_OUT 0x1c
#define SATA_TOP_CTRL_CLIENT_INIT_CTRL 0x20
@@ -237,7 +238,13 @@ static int brcm_ahci_resume(struct device *dev)
static const struct of_device_id ahci_of_match[] = {
{.compatible = "brcm,bcm7445-ahci",
- .data = (void *)SATA_TOP_CTRL_PHY_OFFS},
+ .data = (void *)SATA_TOP_CTRL_28NM_PHY_OFFS},
+ {.compatible = "brcm,bcm7346-ahci",
+ .data = (void *)SATA_TOP_CTRL_40NM_PHY_OFFS},
+ {.compatible = "brcm,bcm7360-ahci",
+ .data = (void *)SATA_TOP_CTRL_40NM_PHY_OFFS},
+ {.compatible = "brcm,bcm7362-ahci",
+ .data = (void *)SATA_TOP_CTRL_40NM_PHY_OFFS},
{},
};
MODULE_DEVICE_TABLE(of, ahci_of_match);
--
2.6.2
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
