On Tue, Oct 27, 2015 at 03:48:03PM +0900, Jaedon Shin wrote:
> The BCM7xxx ARM-based and MIPS-based platforms share a similar hardware
> block for AHCI SATA3.
> 
> The BCM7425 is flagship chipset of 40nm class. Other MIPS-based 40nm
> chipsets has same hardware block. so the compatible string may be use
> brcm,bcm7425-ahci.
> 
> Signed-off-by: Jaedon Shin <[email protected]>
> ---
>  Documentation/devicetree/bindings/ata/brcm,sata-brcmstb.txt | 4 ++--
>  drivers/ata/Kconfig                                         | 2 +-
>  drivers/ata/ahci_brcmstb.c                                  | 1 +
>  3 files changed, 4 insertions(+), 3 deletions(-)
> 
> diff --git a/Documentation/devicetree/bindings/ata/brcm,sata-brcmstb.txt 
> b/Documentation/devicetree/bindings/ata/brcm,sata-brcmstb.txt
> index 4650c0aff6b3..488a383ce202 100644
> --- a/Documentation/devicetree/bindings/ata/brcm,sata-brcmstb.txt
> +++ b/Documentation/devicetree/bindings/ata/brcm,sata-brcmstb.txt
> @@ -4,8 +4,8 @@ SATA nodes are defined to describe on-chip Serial ATA 
> controllers.
>  Each SATA controller should have its own node.
>  
>  Required properties:
> -- compatible         : compatible list, may contain "brcm,bcm7445-ahci" 
> and/or
> -                       "brcm,sata3-ahci"
> +- compatible         : compatible list, may contain "brcm,bcm7445-ahci" or
> +                       "brcm,bcm7425-ahci" or "brcm,sata3-ahci"

If you're going to spin this series anyway, you might as well turn this
into a list, with one compatible string per line. That way it's easier
to expand if needed.

Brian

>  - reg                : register mappings for AHCI and SATA_TOP_CTRL
>  - reg-names          : "ahci" and "top-ctrl"
>  - interrupts         : interrupt mapping for SATA IRQ
> diff --git a/drivers/ata/Kconfig b/drivers/ata/Kconfig
> index 15e40ee62a94..8f535a88a0c7 100644
> --- a/drivers/ata/Kconfig
> +++ b/drivers/ata/Kconfig
> @@ -100,7 +100,7 @@ config SATA_AHCI_PLATFORM
>  
>  config AHCI_BRCMSTB
>       tristate "Broadcom STB AHCI SATA support"
> -     depends on ARCH_BRCMSTB
> +     depends on ARCH_BRCMSTB || BMIPS_GENERIC
>       help
>         This option enables support for the AHCI SATA3 controller found on
>         STB SoC's.
> diff --git a/drivers/ata/ahci_brcmstb.c b/drivers/ata/ahci_brcmstb.c
> index a2df76698adb..e53962cb48ee 100644
> --- a/drivers/ata/ahci_brcmstb.c
> +++ b/drivers/ata/ahci_brcmstb.c
> @@ -343,6 +343,7 @@ static int brcm_ahci_remove(struct platform_device *pdev)
>  
>  static const struct of_device_id ahci_of_match[] = {
>       {.compatible = "brcm,bcm7445-ahci"},
> +     {.compatible = "brcm,bcm7425-ahci"},
>       {},
>  };
>  MODULE_DEVICE_TABLE(of, ahci_of_match);
> -- 
> 2.6.2
> 
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to [email protected]
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Reply via email to