Signed-off-by: Michael Trimarchi <[email protected]>
---
Documentation/devicetree/bindings/usb/usb3503.txt | 5 ++++-
1 file changed, 4 insertions(+), 1 deletion(-)
diff --git a/Documentation/devicetree/bindings/usb/usb3503.txt
b/Documentation/devicetree/bindings/usb/usb3503.txt
index 52493b1..c1a0a91 100644
--- a/Documentation/devicetree/bindings/usb/usb3503.txt
+++ b/Documentation/devicetree/bindings/usb/usb3503.txt
@@ -18,7 +18,8 @@ Optional properties:
- refclk: Clock used for driving REFCLK signal (optional, if not provided
the driver assumes that clock signal is always available, its
rate is specified by REF_SEL pins and a value from the primary
- reference clock frequencies table is used)
+ reference clock frequencies table is used). Use clocks and
+ clock-names in order to assign it
- refclk-frequency: Frequency of the REFCLK signal as defined by REF_SEL
pins (optional, if not provided, driver will not set rate of the
REFCLK signal and assume that a value from the primary reference
@@ -33,4 +34,6 @@ Examples:
intn-gpios = <&gpx3 4 1>;
reset-gpios = <&gpx3 5 1>;
initial-mode = <1>;
+ clocks = <&clks 80>;
+ clock-names = "refclk";
};
--
2.6.3
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
