On 02/12/15 19:18, Brian Norris wrote:
> + Broadcom list + Kamal
>
> Hi Simon,
>
> On Wed, Nov 25, 2015 at 07:49:13PM +0000, Simon Arlott wrote:
>> The BCM63268 has a NAND interrupt register with combined status and enable
>> registers. It also has a clock for the NAND controller that needs to be
>> enabled.
>>
>> Set up the device by enabling the clock, disabling and acking all
>> interrupts, then handle the CTRL_READY interrupt.
>>
>> Add a brcmnand_get_socdata() function so that bcm63268_nand can obtain its
>> data and disable the clock when the device is removed.
>>
>> Signed-off-by: Simon Arlott <[email protected]>
>> ---
>> Added EXPORT_SYMBOL_GPL(brcmnand_get_socdata)
>>
>> (As the brcmnand module must be loaded first its compatible string will
>> apply to any existing devices before the soc-specific module can be
>> loaded.)
>
> What's this comment supposed to mean? The brcmnand module will not
> directly probe any devices. It doesn't register any driver structs by
> itself.
I didn't notice that it didn't actually probe devices. In that case the
documentation should not require "brcm,brcmnand" for soc-specific
variants because the hardware's not really compatible with it.
> (BTW given that, it probably doesn't need its MODULE_DEVICE_TABLE.)
>
>> drivers/mtd/nand/brcmnand/Makefile | 1 +
>> drivers/mtd/nand/brcmnand/bcm63268_nand.c | 179
>> ++++++++++++++++++++++++++++++
>> drivers/mtd/nand/brcmnand/brcmnand.c | 8 ++
>> drivers/mtd/nand/brcmnand/brcmnand.h | 1 +
>> 4 files changed, 189 insertions(+)
>> create mode 100644 drivers/mtd/nand/brcmnand/bcm63268_nand.c
>>
>> diff --git a/drivers/mtd/nand/brcmnand/Makefile
>> b/drivers/mtd/nand/brcmnand/Makefile
>> index 3b1fbfd..b83a9ae 100644
>> --- a/drivers/mtd/nand/brcmnand/Makefile
>> +++ b/drivers/mtd/nand/brcmnand/Makefile
>> @@ -2,5 +2,6 @@
>> # more specific iproc_nand.o, for instance
>> obj-$(CONFIG_MTD_NAND_BRCMNAND) += iproc_nand.o
>> obj-$(CONFIG_MTD_NAND_BRCMNAND) += bcm63138_nand.o
>> +obj-$(CONFIG_MTD_NAND_BRCMNAND) += bcm63268_nand.o
>> obj-$(CONFIG_MTD_NAND_BRCMNAND) += brcmstb_nand.o
>> obj-$(CONFIG_MTD_NAND_BRCMNAND) += brcmnand.o
>> diff --git a/drivers/mtd/nand/brcmnand/bcm63268_nand.c
>> b/drivers/mtd/nand/brcmnand/bcm63268_nand.c
>> new file mode 100644
>> index 0000000..70ad907
>> --- /dev/null
>> +++ b/drivers/mtd/nand/brcmnand/bcm63268_nand.c
>> @@ -0,0 +1,179 @@
>> +/*
>> + * Copyright 2015 Simon Arlott
>> + *
>> + * This program is free software; you can redistribute it and/or modify
>> + * it under the terms of the GNU General Public License version 2 as
>> + * published by the Free Software Foundation.
>> + *
>> + * This program is distributed in the hope that it will be useful,
>> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
>> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
>> + * GNU General Public License for more details.
>> + *
>> + * Derived from bcm63138_nand.c:
>> + * Copyright © 2015 Broadcom Corporation
>> + *
>> + * Derived from
>> bcm963xx_4.12L.06B_consumer/shared/opensource/include/bcm963xx/63268_map_part.h:
>> + * Copyright 2000-2010 Broadcom Corporation
>> + *
>> + * Derived from
>> bcm963xx_4.12L.06B_consumer/shared/opensource/flash/nandflash.c:
>> + * Copyright 2000-2010 Broadcom Corporation
>> + */
>> +
>> +#include <linux/device.h>
>> +#include <linux/clk.h>
>> +#include <linux/io.h>
>> +#include <linux/ioport.h>
>> +#include <linux/module.h>
>> +#include <linux/of.h>
>> +#include <linux/of_address.h>
>> +#include <linux/platform_device.h>
>> +#include <linux/slab.h>
>> +
>> +#include "brcmnand.h"
>> +
>> +struct bcm63268_nand_soc {
>> + struct brcmnand_soc soc;
>> + void __iomem *base;
>> + struct clk *clk;
>> +};
>> +
>> +#define BCM63268_NAND_INT 0x00
>> +#define BCM63268_NAND_STATUS_SHIFT 0
>> +#define BCM63268_NAND_STATUS_MASK (0xfff << BCM63268_NAND_STATUS_SHIFT)
>> +#define BCM63268_NAND_ENABLE_SHIFT 16
>> +#define BCM63268_NAND_ENABLE_MASK (0xffff << BCM63268_NAND_ENABLE_SHIFT)
>> +#define BCM63268_NAND_BASE_ADDR0 0x04
>> +#define BCM63268_NAND_BASE_ADDR1 0x0c
>> +
>> +enum {
>> + BCM63268_NP_READ = BIT(0),
>> + BCM63268_BLOCK_ERASE = BIT(1),
>> + BCM63268_COPY_BACK = BIT(2),
>> + BCM63268_PAGE_PGM = BIT(3),
>> + BCM63268_CTRL_READY = BIT(4),
>> + BCM63268_DEV_RBPIN = BIT(5),
>> + BCM63268_ECC_ERR_UNC = BIT(6),
>> + BCM63268_ECC_ERR_CORR = BIT(7),
>> +};
>> +
>> +static bool bcm63268_nand_intc_ack(struct brcmnand_soc *soc)
>> +{
>> + struct bcm63268_nand_soc *priv =
>> + container_of(soc, struct bcm63268_nand_soc, soc);
>> + void __iomem *mmio = priv->base + BCM63268_NAND_INT;
>> + u32 val = brcmnand_readl(mmio);
>> +
>> + if (val & (BCM63268_CTRL_READY << BCM63268_NAND_STATUS_SHIFT)) {
>> + /* Ack interrupt */
>> + val &= ~BCM63268_NAND_STATUS_MASK;
>> + val |= BCM63268_CTRL_READY << BCM63268_NAND_STATUS_SHIFT;
>> + brcmnand_writel(val, mmio);
>> + return true;
>> + }
>> +
>> + return false;
>> +}
>> +
>> +static void bcm63268_nand_intc_set(struct brcmnand_soc *soc, bool en)
>> +{
>> + struct bcm63268_nand_soc *priv =
>> + container_of(soc, struct bcm63268_nand_soc, soc);
>> + void __iomem *mmio = priv->base + BCM63268_NAND_INT;
>> + u32 val = brcmnand_readl(mmio);
>> +
>> + /* Don't ack any interrupts */
>> + val &= ~BCM63268_NAND_STATUS_MASK;
>> +
>> + if (en)
>> + val |= BCM63268_CTRL_READY << BCM63268_NAND_ENABLE_SHIFT;
>> + else
>> + val &= ~(BCM63268_CTRL_READY << BCM63268_NAND_ENABLE_SHIFT);
>> +
>> + brcmnand_writel(val, mmio);
>> +}
>> +
>> +static int bcm63268_nand_probe(struct platform_device *pdev)
>> +{
>> + struct device *dev = &pdev->dev;
>> + struct bcm63268_nand_soc *priv;
>> + struct brcmnand_soc *soc;
>> + struct resource *res;
>> + int ret;
>> +
>> + priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
>> + if (!priv)
>> + return -ENOMEM;
>> + soc = &priv->soc;
>> +
>> + res = platform_get_resource_byname(pdev,
>> + IORESOURCE_MEM, "nand-intr-base");
>> + if (!res)
>> + return -EINVAL;
>> +
>> + priv->base = devm_ioremap_resource(dev, res);
>> + if (IS_ERR(priv->base))
>> + return PTR_ERR(priv->base);
>> +
>> + priv->clk = devm_clk_get(&pdev->dev, "nand");
>> + if (IS_ERR(priv->clk))
>> + return PTR_ERR(priv->clk);
>
> Perhaps we should put this clock handling in brcmnand.c? Just have it
> treat the clock as optional (i.e., ignore errors except for
> EPROBE_DEFER?), so we don't fail if no clock was provided? This could
> help other platforms too, if they gain clock support.
Unless most soc variants have clocks I'd prefer to leave it in this
module.
> If we do this, you'll want to document the clock in the common binding,
> not the bcm63268-specific part.
>
> Also, could it help to disable/enable the clock during suspend/resume?
> If you move it to brcmnand.c, this would also be pretty simple.
Alternatively, it could proxy the brcmnand_pm_ops functions. I don't
have any way to test suspend/resume.
>> +
>> + ret = clk_prepare_enable(priv->clk);
>> + if (ret)
>> + return ret;
>> +
>> + soc->ctlrdy_ack = bcm63268_nand_intc_ack;
>> + soc->ctlrdy_set_enabled = bcm63268_nand_intc_set;
>> +
>> + /* Disable and ack all interrupts */
>> + brcmnand_writel(0, priv->base + BCM63268_NAND_INT);
>> + brcmnand_writel(BCM63268_NAND_STATUS_MASK,
>> + priv->base + BCM63268_NAND_INT);
>> +
>> + ret = brcmnand_probe(pdev, soc);
>> + if (ret)
>> + clk_disable_unprepare(priv->clk);
>> +
>> + return ret;
>> +}
>> +
>> +static int bcm63268_nand_remove(struct platform_device *pdev)
>> +{
>> + struct brcmnand_soc *soc = brcmnand_get_socdata(pdev);
>> + struct bcm63268_nand_soc *priv = NULL;
>> + int ret;
>> +
>> + if (soc)
>> + priv = container_of(soc, struct bcm63268_nand_soc, soc);
>> +
>> + ret = brcmnand_remove(pdev);
>> + if (ret)
>> + return ret;
>> +
>> + if (priv)
>> + clk_disable_unprepare(priv->clk);
>> +
>> + return 0;
>> +}
>> +
>> +static const struct of_device_id bcm63268_nand_of_match[] = {
>> + { .compatible = "brcm,nand-bcm63268" },
>> + {},
>> +};
>> +MODULE_DEVICE_TABLE(of, bcm63268_nand_of_match);
>> +
>> +static struct platform_driver bcm63268_nand_driver = {
>> + .probe = bcm63268_nand_probe,
>> + .remove = bcm63268_nand_remove,
>> + .driver = {
>> + .name = "bcm63268_nand",
>> + .pm = &brcmnand_pm_ops,
>> + .of_match_table = bcm63268_nand_of_match,
>> + }
>> +};
>> +module_platform_driver(bcm63268_nand_driver);
>> +
>> +MODULE_LICENSE("GPL");
>> +MODULE_AUTHOR("Simon Arlott");
>> +MODULE_DESCRIPTION("NAND driver for BCM63268");
>> diff --git a/drivers/mtd/nand/brcmnand/brcmnand.c
>> b/drivers/mtd/nand/brcmnand/brcmnand.c
>> index 2c8f67f..5f26b8a 100644
>> --- a/drivers/mtd/nand/brcmnand/brcmnand.c
>> +++ b/drivers/mtd/nand/brcmnand/brcmnand.c
>> @@ -2262,6 +2262,14 @@ int brcmnand_probe(struct platform_device *pdev,
>> struct brcmnand_soc *soc)
>> }
>> EXPORT_SYMBOL_GPL(brcmnand_probe);
>>
>> +struct brcmnand_soc *brcmnand_get_socdata(struct platform_device *pdev)
>> +{
>> + struct brcmnand_controller *ctrl = dev_get_drvdata(&pdev->dev);
>> +
>> + return ctrl ? ctrl->soc : NULL;
>> +}
>> +EXPORT_SYMBOL_GPL(brcmnand_get_socdata);
>
> If you move the clk handling to the core brcmnand.c, then you won't need
> this still.
Would you prefer a clock name in the soc data structure that is used to
call devm_clk_get()?
>> +
>> int brcmnand_remove(struct platform_device *pdev)
>> {
>> struct brcmnand_controller *ctrl = dev_get_drvdata(&pdev->dev);
>> diff --git a/drivers/mtd/nand/brcmnand/brcmnand.h
>> b/drivers/mtd/nand/brcmnand/brcmnand.h
>> index ef5eabb..6680419 100644
>> --- a/drivers/mtd/nand/brcmnand/brcmnand.h
>> +++ b/drivers/mtd/nand/brcmnand/brcmnand.h
>> @@ -65,6 +65,7 @@ static inline void brcmnand_writel(u32 val, void __iomem
>> *addr)
>>
>> int brcmnand_probe(struct platform_device *pdev, struct brcmnand_soc *soc);
>> int brcmnand_remove(struct platform_device *pdev);
>> +struct brcmnand_soc *brcmnand_get_socdata(struct platform_device *pdev);
>>
>> extern const struct dev_pm_ops brcmnand_pm_ops;
>>
>
> Brian
>
--
Simon Arlott
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
